Scientific Production 2022

Journals and book series WOS

Journal Article                (69)

 

  1. A. Freitas, T. M. Lima, and P. D. Gaspar, “Ergonomic Risk Minimization in the Portuguese Wine Industry: A Task Scheduling Optimization Method Based on the Ant Colony Optimization Algorithm,” Processes, Article vol. 10, no. 7, 2022, Art. no. 1364.
  2. A. Freitas, T. M. Lima, and P. D. Gaspar, “Meta-Heuristic Model for Optimization of Production Layouts Based on Occupational Risk Assessment: Application to the Portuguese Wine Sector,” Applied System Innovation, Article vol. 5, no. 2, 2022, Art. no. 40.
  3. Chouchene, A. Ventura Carvalho, F. Charrua-Santos, and W. Barhoumi,”Augmented Reality-Based Framework Supporting Visual Inspection for Automotive Industry,” Applied System Innovation, Article vol. 5, no. 3, 2022, Art. no. 48.
  4. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Evaluating the Energy Efficiency and Environmental Impact of COVID-19 Vaccines Coolers through New Optimization Indexes: Comparison between Refrigeration Systems Using HFC or Natural Refrigerants,” Processes, Article vol. 10, no. 4, 2022, Art. no. 790.
  1. Ilangovan, S. Hamdane, P. D. Silva, P. D. Gaspar, and L. Pires, “Promising and Potential Applications of Phase Change Materials in the Cold Chain: A Systematic Review,” Energies, Review vol. 15, no. 20, 2022, Art. no. 7683.
  2. Moradi Bilondi, F. Bagherighajari, M. Abdollahzadehsangroudi, M. J. Kermani, and J. C. Páscoa, “The Role of Porous Carbon Inserts on the Performance of Polymer Electrolyte Membrane Fuel Cells: A Parametric Numerical Study,” Energy Technology, Article vol. 10, no. 12, 2022, Art. no. 2200966.
  3. P. Proença, P. D. Gaspar, and T. M. Lima, “Lean Optimization Techniques for Improvement of Production Flows and Logistics Management: The Case Study of a Fruits Distribution Center,” Processes, Article vol. 10, no. 7, 2022, Art. no. 1384.
  4. P. Silva, T. Węgrzyn, T. Szymczak, B. Szczucka-Lasota, and B. Łazarz, “Hardox 450 Weld in Microstructural and Mechanical Approaches after Welding at MicroJet Cooling,” Materials, Article vol. 15, no. 20, 2022, Art. no. 7118.
  5. V. Carvalho and T. M. Lima, “Quality 4.0 and Cognitive Engineering Applied to Quality Management Systems: A Framework,” Applied System Innovation, Article vol. 5, no. 6, 2022, Art. no. 115.
  6. Magalhães, P. D. Gaspar, A. Corceiro, L. João, and C. Bumba, “Fuzzy Logic Decision Support System to Predict Peaches Marketable Period at Highest Quality,” Climate, Article vol. 10, no. 3, 2022, Art. no. 29.
  7. Rodrigues, P. D. Gaspar, M. P. Simões, P. D. Silva, and L. P. Andrade, “Review on techniques and treatments toward the mitigation of the chilling injury of peaches,” Journal of Food Processing and Preservation, Conference Paper vol. 46, no. 8, 2022, Art. no. e14358.
  1. F. Macedo, A. F. Cunha, J. F. Mano, M. B. Oliveira, and A. P. Silva, “Tricalcium phosphate doped with Mg2+ and combinations of Mn2+, Zn2+ and Fe3+: A DoE study on sintering, mechanical, microstructural and biological properties,” Ceramics International, Article vol. 48, no. 14, pp. 20467-20477, 2022.
  2. Ivanov, R. Gondar, U. Monakhova, A. Guerman, and M. Ovchinnikov, “Electromagnetic uncoordinated control of a ChipSats swarm using magnetorquers,” Acta Astronautica, Article vol. 192, pp. 15-29, 2022.
  3. Morais, P. D. Gaspar, P. D. Silva, L. P. Andrade, and J. Nunes, “Energy consumption and efficiency measures in the Portuguese food processing industry,” Journal of Food Processing and Preservation, Conference Paper vol. 46, no. 8, 2022, Art. no. e14862.
  4. S. Cardoso and P. O. Fael, “8-stroke low heat rejection engine,” Energy Reports, Article vol. 8, pp. 462-467, 2022.
  5. V. Enrique, É. Marcon, F. Charrua-Santos, and A. G. Frank, “Industry 4.0 enabling manufacturing flexibility: technology contributions to individual resource and shop floor flexibility,” Journal of Manufacturing Technology Management, Article vol. 33, no. 5, pp. 853-875, 2022.
  6. Ananias and P. D. Gaspar, “A Low-Cost Collaborative Robot for Science and Education Purposes to Foster the Industry 4.0 Implementation,” Applied System Innovation, Article vol. 5, no. 4, 2022, Art. no. 72.
  7. Assunção, P. D. Gaspar, K. Alibabaei, M. P. Simões, H. Proença, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Real-Time Image Detection for Edge Devices: A Peach Fruit Detection Application,” Future Internet, Article vol. 14, no. 11, 2022, Art. no. 323.
  8. Assunção, P. D. Gaspar, R. Mesquita, M. P. Simões, K. Alibabaei, A. Veiros, and H. Proença, “Real-Time Weed Control Application Using a Jetson Nano Edge Device and a Spray Mechanism,” Remote Sensing, Article vol. 14, no. 17, 2022, Art.4217.
  9. T. Assunção, P. D. Gaspar, R. J. M. Mesquita, M. P. Simões, A. Ramos, H. Proença, and P. R. M. Inacio, “Peaches Detection Using a Deep Learning Technique—A Contribution to Yield Estimation, Resources Management, and Circular Economy,” Climate, Article vol. 10, no. 2, 2022, Art. no. 11.
  10. Enrique, D. V., Lerman, L. V., Sousa, P. R. D., Benitez, G. B., Bigares Charrua Santos, F. M., & Frank, A. G. (2022). Being digital and flexible to navigate the storm: How digital transformation enhances supply chain flexibility in turbulent environments. International Journal of Production Economics, 250 doi:10.1016/j.ijpe.2022.108668
  11. Enrique, D. V., Marodin, G. A., Santos, F. B. C., & Frank, A. G. (2022). Implementing industry 4.0 for flexibility, quality, and productivity improvement:Technology arrangements for different purposes. International Journal of Production Research, doi:10.1080/00207543.2022.2142689
  12. Bagherighajari, A. Ramiar, M. Abdollahzadehsangroudi, J. C. Páscoa, and P. J. Oliveira, “Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields,” International Journal of Energy Research, Article vol. 46, no. 11, pp. 15309-15331, 2022.
  1. Bagherighajari, M. Abdollahzadehsangroudi, M. Esmaeilpour, F. Dolati, and J. Páscoa, “Novel converging-diverging microchannel heat sink with porous fins for combined thermo-hydraulic performance,” Physics of Fluids, Article vol. 34, no. 11, 2022, Art. no. 0118700.
  2. Saconi, A. C., Vieira, M. L., Ribeiro, “Experimental Characterization and Numerical Modeling of the Corrosion Effect on the Mechanical Properties of the Biodegradable Magnesium Alloy WE43 for Orthopedic Applications,” Materials, Article vol. 15, no. 20, 2022, Art. no. 7164.
  3. , Saconi, A. C., Vieira, M. L. Ribeiro, “Experimental Characterization and Numerical Modeling of the Corrosion Effect on the Mechanical Properties of the Biodegradable Magnesium Alloy WE43 for Orthopedic Applications,” Materials Proceedings, Article vol. 8, no. 1, 2022, Art. no. 16.
  4. Jesus, M. L. Aguiar, and P. D. Gaspar, “Computational Tool to Support the Decision in the Selection of Alternative and/or Sustainable Refrigerants,” Energies, Article vol. 15, no. 22, 2022, Art. no. 8497.
  5. Hamrang, M. Abdollahzadeh, M. J. Kermani, S. M. Rahgoshay, Numerical simulation of the PEM fuel cell performance enhancement by various blockage arrangement of the cathode serpentine gas flow channel outlets/inlets. International Journal of Heat and Mass Transfer, vol. 186, 2022
  6. Alves, T. M. Lima, and P. D. Gaspar, “The sociodemographic challenge in human-centred production systems–a systematic literature review,” Theoretical Issues in Ergonomics Science, Review 2022.
  7. C. Vieira, A. C. Vieira, A. de O. Mendes, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Toilet Paper Perforation Efficiency,” BioResources, Article vol. 17, no. 1, pp. 492-503, 2022.
  8. C. Vieira, A. d. O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Embossing Pressure Effect on Mechanical and Softness Properties of Industrial Base Tissue Papers with Finite Element Method Validation,” Proceedings of the Materials Proceeding Materiais 2022-XX International Symposium on Materials, Article vol. 8, 2022.
  9. C. Vieira, A. d. O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Embossing Pressure Effect on Mechanical and Softness Properties of Industrial Base Tissue Papers with Finite Element Method Validation,” Proceedings of the Materials Proceedings, Article vol. 8, no. 1, 2022, Art. no. 52.
  10. C. Vieira, A. O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Embossing Pressure Effect on Mechanical and Softness Properties of Industrial Base Tissue Papers with Finite Element Method Validation,” Materials, Article vol. 15, no. 12, 2022, Art. no. 4324.
  11. C. Vieira, A. O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “FEM Analysis Validation of Rubber Hardness Impact on Mechanical and Softness Properties of Embossed Industrial Base Tissue Papers,” Polymers, Article vol. 14, no. 12, 2022, Art. no. 2485.
  12. C. Vieira, A. O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Embossing Lines and Dots Geometry Effect on the Key Tissue Paper Properties with Finite Element Method Analysis,” Polymers, Article vol. 14, no. 17, 2022, Art. no. 3448.
  13. Lemos, P. D. Gaspar, and T. M. Lima, “Environmental Risk Assessment and Management in Industry 4.0: A Review of Technologies and Trends,” Machines, Review vol. 10, no. 8, 2022, Art. no. 702.
  14. Lemos, P. D. Gaspar, and T. M. Lima, “Individual Environmental Risk Assessment and Management in Industry 4.0: An IoT-Based Model,” Applied System Innovation, Article vol. 5, no. 5, 2022, Art. no. 88.
  15. Mamede, D. F. Macedo, A. Maceiras, and A. P. Silva, “Reinforcement of the Ceramic Matrix of CaO-ZrO2-MgO with Al2O3 Coarse Particles,” Ceramics, Article vol. 5, no. 1, pp. 148-160, 2022.
  16. Nunes-Pereira, F. F. Rodrigues, M. Abdollahzadehsangroudi, J. C. Páscoa, and S. Lanceros-Mendez, “Improved performance of polyimide Cirlexbased dielectric barrier discharge plasma actuators for flow control,” Polymers for Advanced Technologies, Article vol. 33, no. 4, pp. 1278-1290, 2022.
  17. P. L. Ribeiro, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Computational Simulation of an Agricultural Robotic Rover for Weed Control and Fallen Fruit Collection-Algorithms for Image Detection and Recognition and Systems Control, Regulation, and Command,” Electronics (Switzerland), Article vol. 11, no. 5, 2022, Art. no. 790.
  18. Rebelo, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “A Novel mHealth Approach for the Monitoring and Assisted Therapeutics of Obstructive Sleep Apnea,” Applied Sciences (Switzerland), Article vol. 12, no. 20, 2022, Art.10257.
  19. Alibabaei, E. Assunção, P. D. Gaspar, J. M. L. P. Caldeira, and V. N. G. J. Soares, “Real-Time Detection of Vine Trunk for Robot Localization Using Deep Learning Models Developed for Edge TPU Devices,” Future Internet, Article vol. 14, no. 7, 2022, Art. no. 199.
  20. Alibabaei, P. D. Gaspar, E. Assunção, S. Alirezazadeh, and T. M. Lima, “Irrigation optimization with a deep reinforcement learning model: Case study on a site in Portugal,” Agricultural Water Management, Article vol. 263, 2022, Art.107480.
  21. Alibabaei, P. D. Gaspar, E. Assunção, S. Alirezazadeh, T. M. Lima, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Comparison of On-Policy Deep Reinforcement Learning A2C with Off-Policy DQN in Irrigation Optimization: A Case Study at a Site in Portugal,” Computers, Article vol. 11, no. 7, 2022, Art. no. 104.
  1. Alibabaei, P. D. Gaspar, T. M. Lima, R. M. Campos, I. Girão, J. Monteiro, and C. M. Lopes, “A Review of the Challenges of Using Deep Learning Algorithms to Support Decision-Making in Agricultural Activities,” Remote Sensing, Review vol. 14, no. 3, 2022, Art. no. 638.
  2. Pinto de Andrade, A. Veloso, C. Espírito Santo, P. Dinis Gaspar, P. D. Silva,
  3. Resende, H. Beato, C. Baptista, C. M. Pintado, L. Paulo, and M. P. Simões, “Effect of Controlled Atmospheres and Environmental Conditions on the Physicochemical and Sensory Characteristics of Sweet Cherry Cultivar Satin,” Agronomy, Article vol. 12, no. 1, 2022, Art. no. 188.
  4. Abdollahzadeh, F. Rodrigues, J. Nunes-Pereira, J. C. Pascoa, and L. Pires, “Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application,” Sensors and Actuators A: Physical, Article vol. 335, 2022, Art. no. 113391.
  5. Aguiar, P. D. Gaspar, and P. D. da Silva, “Image recognition method for frost sensing applications,” Energy Reports, Article vol. 8, pp. 234-240, 2022.
  6. Davoodi, K. Zografos, P. J. Oliveira, and R. J. Poole, “On the similarities between the simplified Phan-Thien-Tanner model and the finitely extensible nonlinear elastic dumbbell (Peterlin closure) model in simple and complex flows,” Physics of Fluids, Article vol. 34, no. 3, 2022, Art. no. 033110.
  7. Gough, S. F. Santos, A. Almeida, M. Lotfi, M. S. Javadi, D. Z. Fitiwi, G. J. Osorio, R. Castro, and J. P. S. Catalao, “Blockchain-Based Transactive Energy Framework for Connected Virtual Power Plants,” IEEE Transactions on Industry Applications, Article vol. 58, no. 1, pp. 986-995, 2022.
  8. Gough, S. F. Santos, M. Lotfi, M. S. Javadi, G. J. Osorio, P. Ashraf, R. Castro, and J. P. S. Catalao, “Operation of a Technical Virtual Power Plant Considering Diverse Distributed Energy Resources,” IEEE Transactions on Industry Applications, Conference Paper vol. 58, no. 2, pp. 2547-2558, 2022.
  9. L. Aguiar, P. D. Gaspar, P. D. Silva, L. C. Domingues, and D. M. Silva, “Real-Time Temperature and Humidity Measurements during the Short-Range Distribution of Perishable Food Products as a Tool for Supply-Chain Energy Improvements,” Processes, Article vol. 10, no. 11, 2022, Art. no. 2286.
  10. L. Lourenço, R. A. Pitarma, and D. A. Coelho, “A Design Contribution to Ergonomic PC Mice Development,” International Journal of Environmental Research and Public Health, Article vol. 19, no. 13, 2022, Art. no. 8126.
  11. Lotfi, G. J. Osório, M. S. Javadi, M. S. El Moursi, C. Monteiro, and J. P. S. Catalão, “A fully decentralized machine learning algorithm for optimal power flow with cooperative information exchange,” International Journal of Electrical Power and Energy Systems, Article vol. 139, 2022, Art. no. 107990.
  12. Lotfi, T. Almeida, M. S. Javadi, G. J. Osório, C. Monteiro, and J. P. S. Catalão, “Coordinating energy management systems in smart cities with electric vehicles,” Applied Energy, Article vol. 307, 2022, Art. no. 118241.
  13. R. Pendar and J. C. Páscoa, “Numerical Investigation of Plasma Actuator Effects on Flow Control Over a Three-Dimensional Airfoil With a Sinusoidal Leading Edge,” Journal of Fluids Engineering, Transactions of the ASME, Article vol. 144, no. 8, 2022, Art. no. 081208.
  14. R. Pendar, F. Rodrigues, J. C. Páscoa, and R. Lima, “Review of coating and curing processes: Evaluation in automotive industry,” Physics of Fluids, Review vol. 34, no. 10, 2022, Art. no. 101301.
  15. Trancossi, J. C. Pascoa, and S. Sharma, “Response to Comment on: A Critical Review on Heat and Mass Transfer Modelling of Viral Infection and Virion Evolution the Case of SARS-COV2,” Thermal Science, Article vol. 26, no. 2, pp. 1219-1228, 2022.
  16. Y. Ovchinnikov, A. D. Guerman, Y. V. Mashtakov, and D. S. Roldugin, “Mathematical Modeling of the Dynamics of a Low-Flying Spacecraft with a Ramjet Electric Propulsion Engine,” Mathematical Models and Computer Simulations, Article vol. 14, no. 3, pp. 452-465, 2022.
  17. F. D. Silva, J. M. N. da Silva, L. K. D. Silva, T. D. F. M. Lima, A. C. Bornia, L. A. H. D. Souza, W. K. D. S. Leite, and E. M. D. A. Vieira, “Do men and women have different musculoskeletal symptoms at the same musculoskeletal discomfort level?,” Ergonomics, Article vol. 65, no. 11, pp. 1486-1508, 2022.
  18. D. Gaspar, V. N. G. J. Soares, J. M. L. P. Caldeira, L. P. Andrade, and C. D. Soares, “Technological modernization and innovation of traditional agri-food companies based on ICT solutions—The Portuguese case study,” Journal of Food Processing and Preservation, Conference Paper vol. 46, no. 8, 2022, Art. no. e14271.
  19. Mesquita and P. D. Gaspar, “A Novel Path Planning Optimization Algorithm Based on Particle Swarm Optimization for UAVs for Bird Monitoring and Repelling,” Processes, Article vol. 10, no. 1, 2022, Art. no. 62.
  20. M. J. Jalali, G. J. Osorio, S. Ahmadian, M. Lotfi, V. M. A. Campos, M. ShafieKhah, A. Khosravi, and J. P. S. Catalao, “New Hybrid Deep Neural Architectural Search-Based Ensemble Reinforcement Learning Strategy for Wind Power Forecasting,” IEEE Transactions on Industry Applications, Article vol. 58, no. 1, pp. 15-27, 2022.
  1. M. J. Jalali, P. Arora, B. K. Panigrahi, A. Khosravi, S. Nahavandi, G. J. Osório, and J. P. S. Catalão, “An advanced deep neuroevolution model for probabilistic load forecasting,” Electric Power Systems Research, Article vol. 211, 2022, Art. no. 108351.
  2. Valvez, A. P. Silva, and P. N. B. Reis, “Compressive Behaviour of 3D-Printed PETG Composites,” Aerospace, Article vol. 9, no. 3, 2022, Art. no. 124.
  3. Valvez, A. P. Silva, and P. N. B. Reis, “Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts,” Polymers, Article vol. 14, no. 13, 2022, Art. no. 2564.
  4. Devezas and L. C. M. Miranda, “On the global time evolution of the Covid-19 pandemic: Logistic modeling,” Technological Forecasting and Social Change, Article vol. 175, 2022, Art. no. 121387.
  5. M. Lima and D. A. Coelho, “Gender differences in associating musculoskeletal complaints, housework, electronic device usage and physical exercise for administrative workers,” International Journal of Occupational Safety and Ergonomics, Article vol. 28, no. 2, pp. 1189-1197, 2022.
  6. Zhen, G. Qiu, S. Mei, F. Wang, X. Zhang, R. Yin, Y. Li, G. J. Osório, M. Shafiekhah, and J. P. S. Catalão, “An ultra-short-term wind speed forecasting model based on time scale recognition and dynamic adaptive modeling,” International Journal of Electrical Power and Energy Systems, Article vol. 135, 2022, Art. no. 107502.
  7. Morão, T.; Brójo, F.; “Numerical Modeling of the Performance of a Paraffin Hybrid Rocket Motor”, International Journal of Energetic Materials and Chemical Propulsion, V 23, 3, 2024, pp. 1-14. 10.1615/IntJEnergeticMaterialsChemProp.2023047152

       Book Chapters Serial          (9)

 

  1. Menezes, P. D. Gaspar, R. Mesquita, E. Assunção, and M. P. Simões, “GPSbased autonomous navigation system for multitask robotic rover for agricultural activities with augmented reality web application for supervision support on peach orchards,” in Acta Horticulturae vol. 1352, ed, 2022, pp. 601-607.
  2. P. Simões, P. D. Gaspar, E. Assunção, R. Mesquita, and M. P. Simões, “Navigation system of autonomous multitask robotic rover for agricultural activities on peach orchards based on computer vision through tree trunk detection,” in Acta Horticulturae vol. 1352, ed, 2022, pp. 593-599.
  3. Tavares, P. D. Gaspar, M. L. Aguiar, R. Mesquita, and M. P. Simões, “Robotic arm and gripper to pick fallen peaches in orchards,” in Acta Horticulturae vol. 1352, ed, 2022, pp. 567-573.
  4. D. Gaspar, J. Alves, and T. M. Lima, “Towards the Application of a Simplified Approach for OSH Risk Assessment Through a User-Friendly and Expedite Computational Tool,” in Studies in Systems, Decision and Control vol. 406, ed, 2022, pp. 41-51.
  5. Domingues, F. Brójo, “Conversion of Gas Turbine Combustors to Operate with a Hydrogen-Air Mixture: Modifications and Pollutant Emission Analysis, in Hydrogen Energy – New Insights, IntechOpen, 2023.
  6. Veiros, R. Mesquita, D. Gaspar, and M. P. Simões, “Multitask robotic rover for agricultural activities (R2A2): a robotic platform for peach orchards,” in Acta Horticulturae vol. 1352, ed, 2022, pp. 89-95.
  7. Veloso, N. Roque, A. Barateiro, C. Ramos, S. Lopes, P. Fragoso, P. Silvino, F. Vieira, M. C. Horta, D. Gaspar, C. Canavarro, and M. P. Simões, “Nutrient status and organic matter content of newly-established peach orchards in central Portugal,” in Acta Horticulturae vol. 1352, ed, 2022, pp. 177-184.
  8. Veloso, D. Gaspar, L. P. Andrade, C. E. Santo, M. Resende, P. D. Silva, C. Canavarro, and M. P. Simões, “The effect of controlled atmosphere storage on fruit quality and postharvest performance of ‘Sweet Henry’ peach cultivar,” in Acta Horticulturae vol. 1352, ed, 2022, pp. 635-642.
  9. Domingues, R.; Brójo, F.; “CFD Analysis of the Combustion of Hydrogen Fuel on a CFM56-3 Combustor”, in Hydrogen – New Insights, IntechOpen, 2022, 10.5772/intechopen.106224

 

 

Conference Proceedings (25)

  1. Nezhad, P. H. J. Nardelli, F. Ghanavati, S. Sahoo, and G. J. Osorio, “MixedInteger Linear Programming based Maintenance Scheduling of Generating Units,” in 2022 IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I and CPS Europe 2022, 2022.
  2. Nezhad, P. H. J. Nardelli, S. Sahoo, F. Ghanavati, and G. J. Osorio, “A Centralized Home Energy Management System to Minimize Consumer’s Electricity Bill,” in 2022 IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I and CPS Europe 2022, 2022.
  3. Ilangovan, D. Gaspar, P. D. Silva, A. R. Gonçalves, A. M. Sampaio, A. J. Pontes, and N. Alves, “CFD parametric study of thermal performance of different fruit packaging box designs,” in AIP Conference Proceedings, 2022, vol. 2425.
  4. Nunes, Brójo “Experimental Study of a Novel 4 Stroke Spark Ignition GearedHypocycloid Engine”, Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio.
  5. Fernandes, P. D. Silva, L. C. Pires, and P. D. Gaspar, “Adjusting the Operating Conditions of a Refrigeration System in Order to Reduce the Frost growth on Heat Exchange Surfaces,” in AIP Conference Proceedings, 2022, vol. 2425.
  6. Marto, F. Brójo “Hybrid-Electric Propulsion Solutions for Uav Application”, Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio.
  7. F. Rodrigues, M. Abdollahzadeh, F. Bagherighajari, and J. Pascoa,”Numerical simulation of anti-icing effect with dielectric barrier discharge plasma actuators on a surface of an airfoil,” in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2022, vol. 1.
  1. M. Parente, R. Simões, and P. N. B. Reis, “Effect of graphene nanoparticles on suspension viscosity and mechanical properties of epoxy-based nanocomposites,” in Procedia Structural Integrity, 2022, vol. 37, pp. 820-825.
  2. Magalhães, F. Brójo, “Design of a Single Expansion Ramp Nozzle and Numerical Investigation of Operation at Overexpanded Conditions”, SPACE PROPULSION 2022, Estoril, Portugal, 09 – 13 may 2022.
  3. B. Monteiro, F. Jorge, J. Santos, P. Antunes, A. Guerman. A review of SmallSat constellations for IoT connectivity. Proceedings of the International Astronautical Congress, 73rd IAC, 2022 Paris, France, Paper IAC-22.B4.7.4.
  4. P. Silva, P. Santos, J. M. Parente, S. Valvez, and P. N. B. Reis, “Effect of different hostile solutions on mechanical properties of composite materials,” in Procedia Structural Integrity, 2022, vol. 37, pp. 841-846.
  5. R. Pendar and J. C. Páscoa, “Electrostatic Painting Process: Impact of Using Connected High-Voltage Embodiments With Rotary Bell Atomizers on Droplets Transport and Deposition,” in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2022, vol. 2.
  6. R. Pendar, J. C. Páscoa, and R. Lima, “Numerical Investigation of Automotive Paint Oven for Improving the Thermal Efficiency,” in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2022, vol. 2.
  7. Domingues, F. Brójo, P. Oliveira “CFD Analysis of the Combustion of Hydrogen Fuel on a CFM56-3 Combustor”, Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition IMECE2022 October 30-November 3, 2022, Columbus, Ohio.
  8. Cândido and J. C. Páscoa, “Numerical analysis of interfacial electrohydrodynamic flow with modal decomposition,” in ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2022, vol. 8.
  9. R. Lopez, G. Gutierrez-Alcaraz, M. S. Javadi, G. J. Osorio, and J. P. S. Catalao, “Flexibility Participation by Prosumers in Active Distribution Network Operation,” in 2022 IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I and CPS Europe 2022, 2022.
  10. Valvez, A. P. Silva, P. N. B. Reis, and F. Berto, “Annealing effect on mechanical properties of 3D printed composites,” in Procedia Structural Integrity, 2022, vol. 37, pp. 738-745.
  11. Morão, F. Brójo, “Numerical Modelling of the Performance of a Paraffin Hybrid Rocket Motor”, SPACE PROPULSION 2022, Estoril, Portugal, 09 – 13 may 2022.
  12. Morão, T.; Brójo, F.; “Numerical Modeling of the Performance of a Paraffin Hybrid Rocket Motor”, SPACE PROPULSION 2022, Estoril, 9-13 Maio 2022
  13.  

    Magalhães, J.; Brójo, F.; “Design of a Single Expansion Ramp Nozzle and Numerical Investigation of Operation at Over-Expanded Conditions”, SPACE PROPULSION 2022, Estoril, 9-13 Maio 2022

  14.  

    Nunes, A.; Brójo, F.; “Impact of the Rotor Material on the Performance of an Eddy Current Brake”, ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, 28-30 November 2022, Covilhã, Portugal

  15.  

    Duarte, A.; Brójo, F.; “Passive System for Combustion Optimization of Internal Combustion Engines”, ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, 28-30 November 2022, Covilhã, Portugal

  16.  

    Simão, D.; Brójo, F.; “Design and Optimization of a Bi-dimensional admission for a supersonic aircraft”, ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, 28-30 November 2022, Covilhã, Portugal

  17.  

    Pereirinha, I.; Brójo, F.; “Simulation of the performance of an oblique detonation wave engine”, ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, 28-30 November 2022, Covilhã, Portugal

  18.  

    Oliveira, P.; Brójo, F.; “Influence of water percentage on performance and emissions of a diesel engine fuelled with
    water-emulsified diesel”, ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, 28-30 November 2022, Covilhã, Portugal

     

 

Other communications at international conferences: (15)

  1. Alves, J., Lima, T. M. (2022, September 25-28). Industry 4.0 and the sociodemographic challenge: Proposals for a human-centric approach. 11th International Conference WorkingOnSafety (WOS2022), Olhão, Portugal.
  2. Andrade, LP., Gaspar, P.D., Simões, M.P., Nunes, J., Veloso, A. (2022). Conservação de cereja e pêssego em atmosferas controladas – Monitorização e mecanismos de controlo. 9º Congresso Luso-Moçambicano de Engenharia (CLME 2022) / VI Congresso de Engenharia de Moçambique (VI CEM), Maputo, Moçambique, August 28 – September 1, 2022.
  3. Curto, J., Gaspar, P.D., Silva, P.D., Ilangovan, A., Alves, N. Transient 3D CFD modelling of the thermal performance of fruit packaging boxes with PCM alveoli.

7th IIR International Conference on Sustainability and the Cold Chain (ICCC 2022).

Newcastle, United Kingdom, April, 11-13, 2022. (DOI: 10.18462/iir.iccc2022.1128)

  1. Fernandes, D., Silva, P.D., Pires, L.C., Gaspar, P.D. (2022). Adjusting the operating conditions of a refrigeration system in order to reduce the frost growth on heat exchange surfaces. AIP Conference Proceedings 2425, 420020. (DOI: 10.1063/5.0082157)
  2. Filipa, B., Dos, M., Paula, , Garcez, B., Daniela, T., & Lima, F. de. (2022). Responsabilidade Social No Setor Da Indústria Mineira – A Perceção do Gestor Mineiro- ENEGEP
  3. Gaspar, P.D., Gonçalves, E., Andrade, L.P. (2022). Delay of fruits ripening by gases inhibition/activation – A review of techniques, methods, and devices. IUFoST 2022 – 21st World Congress of Food Science & Technology Future of Food: Innovation, Sustainability & Health, Singapore, October 31 – November 3, 2022.
  4. Ilangovan, A., Gaspar, P.D., Silva, P.D., Gonçalves, A.R., Sampaio, A.M., Pontes, A.J., Alves, N. (2022). CFD parametric study of thermal performance of different fruit packaging box designs. AIP Conference Proceedings 2425, 420019 (DOI: 10.1063/5.0081344)
  5. Ilangovan, A., Silva, P.D., Gaspar, P.D., Duarte, D. Improving the thermal performance of fruit packaging boxes by using alveoli with phase change material. 7th IIR International Conference on Sustainability and the Cold Chain (ICCC 2022).

Newcastle, United Kingdom, April, 11-13, 2022. (DOI: 10.18462/iir.iccc2022.1135)

  1. Marcos, D., Migués, M., Gomes, H., Garcez, A., & Lima, T. M. (2022). Otimização Do Planejamento da Produção- ENEGEP
  2. Moreira, B., Gaspar, P.D., Lima, T.M. (2022). Computational tool to support the sustainable selection of films and/or packaging for horticultural products. IUFoST 2022 – 21st World Congress of Food Science & Technology Future of Food: Innovation, Sustainability & Health, Singapore, October 31 – November 3, 2022.
  3. Oliveira H. R. D. , Garcez, A. P. B., & LIMA, T. M. (2022, October 10). Proposta de Layout para Departamento de Maquinação CNC em Empresa Metalomecânica- ENEGEP -https://doi.org/10.14488/ENEGEP2022_TN_ST_382_1889_45043
  4. Santos, E. M. V., Oliveira, C. M. M., Pereira, J. F., Garcez, A. P. B., & Lima, T.
  5. (2022, October 10). Otimização de um Layout Recorrendo Ao Diagrama de

Spaghetti-                                                                           ENEGEP.

https://doi.org/10.14488/ENEGEP2022_TN_ST_382_1889_45069

  1. Santos, K. F., Garcez, A., da Silva, R. M., & Charrua-Santos, F. (2022). Digital transformation and lean thinking: perceived interconnections in the management of educational services at campus III of the Federal University of Paraíba during and after the covid-19 pandemic. In ICERI2022 Proceedings (pp. 8144-8148). IATED.
  2. Silva, Abílio P., “Modelling of elastic modulus and thermal conductivity of ceramic composites using 3D volume elements“, Keynote Speaker of the 8th International Conference on Innovative Research, organized under the 14th edition of EUROINVENT, European Exhibition of Creativity and Innovation, held in Iasi from 26th to 28th of May 2022 at Palace of Culture Iasi, ROMÉNIA
  3. Silva, J., Gaspar, P.D., Almeida, A. (2022). Unmanned aerial vehicles application in agriculture: Possible solutions for the Portuguese territory. International Congress on Engineering – Innovation and Sustainability Praxis (ICEUBI 2022), University of Beira Interior, Covilhã, Portugal, November, 28-30, 2022.

Other communications at national conferences (11)

  1. Lopes, C.M., Monteiro, J., Agostinho, M., Mexia, D., Alibabaei, K., Antunes, P. Monteiro, A., Rodrigues, G., Franco, J.C., Braga, R., Campos, R.M., Vicente, M.I., Serra, R., Girão, I., Gaspar, P.D. (2022). Sistema operacional inteligente de informação e suporte à decisão em agrobiodiversidade aplicado à viticultura: Resultados preliminares. Simpósio de Viticultura & IV Colóquio Vitivinícola (VitiVino 2022), Palmela, Novembro, 2022.
  2. Paulo Santos, Abílio P. Silva, Paulo Reis and Carlos Coelho, Viscoelastic response of carbon laminates previously subjected to low velocity impacts, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28, 28, 30, University of Beira Interior, Covilhã, Portugal.
  3. Mariana Veloso, Tomasz Węgrzyn, Bozena Szczucka and Abílio P. Silva, Evolution of the use of polymeric materials in mid-range cars, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28 – 30, University of Beira Interior, Covilhã, Portugal.
  4. Duarte F. Macedo, Filipe J. Oliveira, Mariana B. Oliveira and Abílio P. Silva, Ceramic matrix with carbon allotropes: – characterization and improved mixed methodologies, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28 – 30, University of Beira Interior, Covilhã, Portugal.
  5. Hugo Rocha, Pedro Alves, André Rodrigues, Luis Parada and Miguel Silvestre. “Propeller design and optimization for an evtol uav considering prandtl’s root correction”. ICEUBI 2022 – International Congress on Engineering, 28 a 30 de novembro de 2022, Covilhã, Portugal.
  6. Rodrigues, M. Abdollahzadehsangroudi, J. Nunes-Pereira, J.C. Pascoa, “Plasma actuators as novel means for icing control and aerodynamic enhancement”, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28 – 30, University of Beira Interior, Covilhã, Portugal.
  7. Abdollahzadehsangroudi, F. Rodrigues, F. Bagherighajari, J.

Nunes-Pereira, J.C. Pascoa, “Enhanced surface cooling with Dielectric barrier discharge plasma actuators”, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28 – 30, University of Beira Interior, Covilhã, Portugal.

  1. Moreira, J. Pascoa, F. Rodrigues, S. Cândido, “Development and validation of a background oriented schlieren (BOS) system for air density and temperature quantification”, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28 – 30, University of Beira Interior, Covilhã, Portugal.
  2. Pendar, J. Pascoa, “Advances in Evaluation of Effective System Parameters in Electrostatic Spraying”, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28 – 30, University of Beira Interior, Covilhã, Portugal.
  3. Cândido, J. Pascoa, “Numerical Simulation of Axisymmetric Electrohydrodynamic Jets with Volume of Fluid Method”, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28 – 30, University of Beira Interior, Covilhã, Portugal.
  4. Teixeira, J. Pascoa, “Numerical simulation of hypersonic nozzle flows in vibrational non-equilibrium”, ICEUBI 2022, International Congress on Engineering, Innovation and Sustainability Praxis, November 28 – 30, University of Beira Interior, Covilhã, Portugal.

 

2022 Events:

 

  1. P. Silva, Organization of the event: Seminar entitled “Energy challenges and the critical raw materials in the Portuguese industry”; Date: June 22, 2022; Local: Auditório da Ordem dos Engenheiros da Região Centro, Coimbra.
  2. P. Silva, organization within the framework of the event “C-MAST Seminars“, of the lectures:
    • P. Silva, C-MAST/UBI, “Modelling of elastic modulus and thermal conductivity of ceramic composites using 3D volume elements“; Faculdade de Engenharia, UBI, 04/05/2022.
    • Adhiyaman Ilangovan, C-MAST/UBI, “Post harvest storage of perishable products”; Faculdade de Engenharia, UBI, 04/05/2022.
    • André Vieira, C-MAST/UBI, “Simulating the mechanical behavior of biodegradable materials and structures during degradation”, Faculdade de Engenharia, UBI, 01/06/2022.
    • Duarte F. Macedo, C-MAST/UBI, “TCP doped with Mg2+ and combinations of Mn2+, Zn2+ and Fe3+: A DoE study on sintering, mechanical, microstructural and biological properties”, Faculdade de Engenharia, UBI, 13/07/2022.
    • Eduardo Assunção, C-MAST/UBI, “Precision Agriculture: Image processing applications”, Faculdade de Engenharia, UBI, 01/06/2022.
    • Filipa Balça, C-MAST/UBI, “Optimization of multiphase zirconia ceramic composites for aeronautical thermomechanical applications”, Faculdade de Engenharia, UBI, 27/07/2022.
    • Frederico Rodrigues, C-MAST/UBI, “Dielectric barrier discharge plasma actuators for thermo-fluid dynamics application”, Faculdade de Engenharia, UBI, 18/05/2022.
    • João Parente, C-MAST/UBI, “Effect of graphene nanoparticles on suspension viscosity and mechanical properties of epoxy-based nanocomposites”; Faculdade de Engenharia, UBI, 30/06/2022.
    • Joel Alves,               C-MAST/UBI,        “Human-centric           approach: The sociodemographic challenge in Industry 4.0”; Faculdade de Engenharia, UBI, 30/06/2022.
    • Khadijeh Alibabaei, C-MAST/UBI, “Crop Yield Estimation Using Deep Learning Based on Climate Big Data and Irrigation Scheduling”, Faculdade de Engenharia, UBI, 18/05/2022.
    • Mahdi Abdollahzadeh, C-MAST/UBI, “Design and modeling of high performance Fuel cell system for efficient and clean Energy supply”, Faculdade de Engenharia, UBI, 27/07/2022.
    • Pedro Oliveira, C-MAST/UBI, “Water in Diesel Emulsions”, Faculdade de Engenharia, UBI, 13/07/2022.
    • Abderrezak Bezazi, Univ. Guelma/Algeria, “Mechanical behaviour of structures (composite laminate, re-entrant Honeycomb and foams) having a negative Poisson’s ratio (Auxetic)”; Faculdade de Engenharia, UBI, 15/06/2022.
    • Nabil Kribs, Univ. Guelma/Algeria, “Study of roughness during the machining of materials by turning”, Faculdade de Engenharia, UBI, 15/06/2022.
  3. Brójo, F., Chair of the International Congress on Engineering – Innovation and Sustainability Praxis (ICEUBI 2022), University of Beira Interior, Covilhã, Portugal, November, 28-30, 2022.
  4. Gaspar, P.D. Coordinator at the Faculty of Engineering of UBI of the activity “Discovering Robotics” in the event “The days of UBI junior”, aimed at students from preschool to 6th grade (March, 2022-…).
  5. Gaspar, P.D., Coordinator of the event “Spaghetti Bridges Contest – Humberto Santos Contest”, held at the Department of Electromechanical Engineering, Faculty of Engineering of the University of Beira Interior (2009-…).
  6. Gaspar, P.D., Coordinator at the Faculty of Engineering of UBI Engenharias of the activity “Initiation to Robotics – Construction and programming of a sumo wrestler robot” in the event “Winter University” directed to students of the 3rd Cycle of Basic Education (April, 2022-…)
  7. Gaspar, P.D., Coordinator at the Faculty of Engineering of UBI of the Engineering activity “Initiation to Robotics – Construction and programming of a sumo wrestler robot” in the event “Summer University” addressed to students of the 3rd Cycle of Basic Education (July, 2022-…).
  8. Parente, D. Macedo, J. Nunes-Pereira, A.P. Silva, Organization of the Workshop entitled “Materiais Compósitos: Produção e Caracterização”, Faculdade de Engenharia, Universidade da Beira Interior, Covilhã, Portugal (16-May-2022).

 

Last Projects C-MAST

  • PrunusBOT (2018-2022), 466K€ Total, 108 C-MAST;
  • PrunusPÓS (2018-2022), 466K€ Total, 108 C-MAST;
  • Pack2Life (2018-2021); S4Agro (2020-2022):GreenAuto (2022-2025) 586K Total, 293K C-MAST;
  • Montanha Viva – Sistema Previsional Inteligente do Vigor de Plantas de Montanha e de Informação e Suporte à Decisão em Sustentabilidade Ambiental, (2022-2025), 301K Total, 220K C-MAST;
  • RecMine –Environmental footprint reduction through eco-friendly technologies of mine tailings recycling, 529 k;
  • BioD’Agro -Sistema operacional inteligente de informação e suporte à decisão em AgroBiodiversidade (2021-2024), 1.230K Total, 71K C-MAST;
  • PAM4Wellness (2021-2023) 466 K Total, 288 K C-MAST:
  • START CIRCULAR (2021-2024), 376 K Total, 35 K C-MAST;
  • RE-START (2021-2023), 299K Total, 44 K C-MAST;
  • S4Agro (2020-2023), 1.102 K Total, 250 K C-MAST;
  • MED-WET (2021-2024), 1.230 K Total, 70 K C-MAST;
  • miraASSETS (2021-2023), 650 K Total, 350 K C-MAST;
  • Nunes-Pereira, EcoSensHeal: Self-sensing and self-healing composites for high responsibility applications based on recycled materials (2022.05613.CEECIND), CEEC Individual 5ª edição, C-MAST.

 

Patents

  1. Pendar, F. Rodrigues, J. Páscoa, “Pulverizador eletrostático baseado em pás retráteis de alta tensão ou anel de controlo ajustável de alta tensão”, Patente Nacional n.º PT117317,Publicada a 30/12/ 2022. Status: concedded.
  2. Sousa, A.R., Gaspar, P.D., “Dispensador modular inteligente para administração medicamentosa”, Modelo de utilidade, MUT n.º 12106, Boletim da Propriedade Industrial 206/2020, Instituto Nacional da Propriedade Industrial (INPI), 11/01/2022. Status: Submitted.
  3. Bastos, J., Gaspar, P.D. “Proteção Coletiva (EPC) do tipo pórtico para desinfeção por LEDs FAR-UVC de vírus, bactérias, fungos e outros agentes patogénicos”, PAT n.º 117216, Boletim da Propriedade Industrial n.º 219/2022, Instituto Nacional da Propriedade Industrial (INPI), 10/01/2022. Status: Submitted.
  4. Vieira, J.C., Vieira, A.C., Mendes, A.O., Carta, A.M., Fiadeiro, P.T., Costa, A.P., “Sistema de gofragem laboratorial para produtos papeleiros”, 2022, Portugal, Número do registo: PT118289, data de depósito: 27/10/2022. Status: Submitted.
  5. Vieira, J.C., Vieira, A.C., Mendes, A.O., Carta, A.M., Fiadeiro, P.T., Costa, A.P., “Sistema laboratorial de perfuração para papel tissue”, 2022, Portugal, Número do registo: PT118288 data de depósito: 27/10/2022. Status: Submitted.

List of Master theses 2022 conducted within and supervised by members of CMAST

  1. Ana Beatriz Pena Proença, “Otimização de Fluxos Produtivos e Gestão Logística- Análise de Tempos e Métodos: Caso de Estudo – Sociedade Agrícola Quinta de Lamaçais”. Advisor: Pedro Miguel de Figueiredo Dinis Oliveira Gaspar, UBI 2022, EGI.
  2. Ana Gisela Rodrigues Agostinho, “Projeto de produção de uma membrana antibacteriana aplicável a estetoscópios”. Advisor: André Ferreira Costa Vieira, UBI 2022, EGI.
  3. Ana Luísa Folques Carvalho, “Compósitos poliméricos reforçados com nanoplaquetas de grafeno. Fabrico, caracterização mecânica e elétrica”. Advisor: João Pedro Nunes Pereira, UBI 2022, EE.
  4. André Filipe Gomes Rodrigues, “Development of a Propeller Blade for a Variable Pitch Mechanism”. Advisor: Miguel Ângelo Rodrigues Silvestre, UBI 2022, AERO.
  5. Antonio Amezcua Sánchez, “Design, construction and testing of a Pulsejet engine”. Advisor: Francisco Miguel Ribeiro Proença Brojo, UBI 2022, AERO.
  6. Bruna Filipa Mendes dos Santos, “Responsabilidade Social no Setor da Indústria de Mineração – A Perceção do Gestor Industrial”. Advisor: Tânia Daniela Felgueiras de Miranda Lima, UBI 2022, EGI.
  7. Diogo Rafael Ribeiro Pinto Simão, “Optimization of a Bi-dimensional Intake for a Supersonic Aircraft Using a Genetic Algorithm”. Advisor: Francisco Miguel Ribeiro Proença Brojo, UBI 2022, AERO.
  8. Edson Lopes Barbosa Leite, “Estudo do Confinamento da Hélice para o Sistema Propulsivo do Avião do Air Cargo Challenge 2021/2022”. Advisor: Miguel Ângelo Rodrigues Silvestre, UBI 2022, AERO.
  9. Filipa Alexandra Barbosa Balça, “Otimização de compósitos multifásicos de zircónia para aplicações termomecânicas aeronáuticas”. Advisor: Abílio Manuel Pereira da Silva, UBI 2022, AERO.
  10. Gil Chiloia Joaquim José, “Protótipos de Materiais didáticos Para Aulas Experimentais na Disciplina de Física na 11ª Classe do Ensino Geral em Angola”. Advisor: André Ferreira Costa Vieira, UBI 2022, EE.
  11. Gonçalo Pereira da Fonseca, “Atribuição de propriedades somatosensoriais a uma prótese de membro superior”. Advisor: Abílio Manuel Pereira da Silva, UBI 2022, BIOENG.
  12. Guilherme Alexandre Lopes de Jesus, “Ferramenta computacional de apoio à decisão na seleção de refrigerantes alternativos e/ou sustentáveis”. Advisor: Pedro Miguel de Figueiredo Dinis Oliveira Gaspar, UBI 2022, EGI.
  13. Guilherme José Matos Fortuna, “Implementação de sistemas de rastreabilidade industrial Estudo de caso: Mepisurfaces, Lda”. Advisor: Pedro Miguel de Figueiredo Dinis Oliveira Gaspar, UBI 2022, EGI.
  14. Inês Isabel Ribeiro Pereirinha, “Performance Comparison of a Scramjet with an Oblique Detonation Wave Engine”. Advisor: Francisco Miguel Ribeiro Proença Brojo, UBI 2022, AERO.
  15. João Manuel Figueira Neves Amaro, “Embraiagem centrífuga UBICAR: Otimização”. ”. Advisor: Paulo Manuel Oliveira Fael, UBI 2022, EE.
  16. João Pedro Lopes Ribeiro, “Simulação Computacional de um Rover Robótico Agrícola para Pulverização Controlada de Infestantes e Recolha de Frutos Caídos”.

Advisor: Pedro Miguel de Figueiredo Dinis Oliveira Gaspar, UBI 2022, EE.

  1. João Pedro Simões Vale, “Aerothermodynamic analysis of an experimental rocket aimed to test micro-launcher technologies”. Advisor: Francisco Miguel Ribeiro Proença Brojo, UBI 2022, AERO.
  2. José Alexandre Esteves dos Santos, “Análise da maquinabilidade de componentes em latão”.Advisor: Hélder Joaquim Dinis Correia, UBI 2022, EE.
  3. Kateryna Oleksandrivna Shvydyuk, “Multifunctional Advanced Ceramics for Aeronautical and Aerospace Applications Study of MgO Al2O3, MgO CaZrO3, and YSZ Ceramic Composites”. Advisor: Abílio Manuel Pereira da Silva, UBI 2022, AERO.
  4. Liliana da Fonte Domingues, “Performance Optimisation of a Geared Turbofan with Intercooler and Regenerator”. Advisor: Francisco Miguel Ribeiro Proença Brojo, UBI 2022, AERO.
  5. Marcos Filipe Andrade Nunes Rosa, “Preliminary Design of an eVTOL Aircraft”. Advisor: Miguel Ângelo Rodrigues Silvestre, UBI 2022, AERO.
  6. Maria de Lima Fonseca, “Certificação no Setor Agroalimentar como um Facilitador na Implementação da Filosofia Lean – Estudo de Caso numa Empresa de Transformação de Bacalhau”. Advisor: Tânia Daniela Felgueiras de Miranda Lima, UBI 2022, EGI.
  7. Maria Inês Duarte Iglésias, “Pás de Rotor de Aerogeradores Eólicos em Fim do Ciclo de Vida: Uma Abordagem de Economia Circular”. Advisor: Tânia Daniela Felgueiras de Miranda Lima, UBI 2022, EGI.
  8. Mariana Ferreira Reis, “Evolution of the Aviation Industry: Impact of Digital Transformation of Learning Solutions”. Advisor: Pedro Vieira Gamboa, UBI 2022, AERO.
  9. Martina Batista Barroso, “Otimização do Processo de Desenvolvimento de Produto Através da Aplicação de Ferramentas Lean”. Advisor: Tânia Daniela Felgueiras de Miranda Lima, UBI 2022, EGI.
  10. Miguel André Barbosa Moreira, “Estudo sobre actuadores a plasma usando a técnica Schlieren orientado para o fundo”. Advisor: Frederico Miguel Freire Rodrigues, UBI 2022, EE.
  11. Rafael Silva Domingues, “CFD ANALYSIS OF THE COMBUSTION OF HYDROGEN FUEL ON A CFM56-3 COMBUSTOR”. Advisor: Francisco Miguel Ribeiro Proença Brojo, UBI 2022, AERO.
  12. Ricardo Jorge Faria Palmeira, “Low speed aerofoil optimization”. Advisor: Pedro Vieira Gamboa, UBI 2022, AERO.
  13. Rodrigues Pascoal Castro, “Estudo experimental do processo de secagem de um composto orgânico”. Advisor: Luis Carlos Carvalho Pires, UBI 2022, EE.
  14. Sara Débora Morgado Marcelino, “Lean Laboratory – Proposta de Aplicação de Lean a Laboratórios de Ensino e Investigação”. Advisor: Tânia Daniela Felgueiras de Miranda Lima, UBI 2022, EGI.
  15. Vasco Miguel Pires Lopes, “A Ergonomia de Produção como Ferramenta para a Melhoria da Produtividade e das Condições de Trabalho”. Advisor: Tânia Daniela Felgueiras de Miranda Lima, UBI 2022, EGI.