Conferences and Conference Proceedings (42)
[1] A. Silva, F. Booth, C. Baudín, and P. Pena, “Wear Behaviour and Fracture Mechanism of CaZrO3 – MgO Ceramic Against Ceramic and Metal Ball,” in XV Portuguese Conference on Fracture, Lisbon, 2016.
[2] Abílio P. Silva, Fernando Booth, Liliana Garrido, Esteban Aglietti, Pilar Pena, and C. Baudín, “Sliding Wear Behaviour of Pure and Non-Pure CaZrO3-MgO Nanocomposites Against Steel and ZrO2,” in LV Congreso Nacional de La Sociedad Española de Cerámica y Vidrio, Sevilla, 2016.
[3] A. M. Amaro, M. I. M. Pinto, S. Lopes, P. N. B. Reis, and J. M. Cirne, “Effect of Cementitious Solutions on the Mechanical Performance of GFRP Composites,” in IRF2016: 5th International Conference Integrity-Reliability-Failure, 2016, no. ISBN: 978-989-98832-5-3, pp. pp. 307-308.
[4] A. P. S. António F. Rosa, Ana M. Segadães, Rogério A. Lopes. , “Characterization of Al2O3-MgO-SiO2 refractory waste from dismantled linings of cast steel furnaces and design of new ceramic components,” in LV Congreso Nacional de La Sociedad Española de Cerámica y Vidrio, Sevilla, 2016.
[5] A. W. Bizuayehu, D. Z. Fitiwi, and J. P. S. Catalao, “Advantages of optimal storage location and size on the economic dispatch in distribution systems,” in IEEE Power and Energy Society General Meeting, 2016, vol. 2016-November.
[6] A. A. Burov and V. I. Nikonov, “Dynamics of a triple asteroid and a massive point, subjected mutual attraction,” in Proceedings of 2016 International Conference “Stability and Oscillations of Nonlinear Control Systems” (Pyatnitskiy’s Conference), STAB 2016, 2016.
[7] R. Carneiro, P. D. Gaspar, P. D. Silva, and L. C. Domingues, “Numerical modeling of cold room’s hinged door opening and closing processes,” in AIP Conference Proceedings, 2016, vol. 1738.
[8] M. Carvalhosa, S. Beatrice, S. Azevedo, and F. Charrua-Santos, “Proposal of a Lean Index Development in Organizational Contexts,” in Proceedings of the World Congress on Engineering and Computer Science, 2016, vol. 2.
[9] D. F. Cruz, E. M. G. Rodrigues, R. Godina, C. M. P. Cabrita, J. C. O. Matias, and J. P. S. Catalao, “Novel methodology for integrated analog front-end signal processing blocks based portable multifunctional sensor for biomedical applications,” in EEEIC 2016 – International Conference on Environment and Electrical Engineering, 2016.
[10] D. F. Cruz, E. M. G. Rodrigues, R. Godina, C. M. P. Cabrita, J. C. O. Matias, and J. P. S. Catalao, “Innovative experimental low cost electronics operated instrumentation for wearable health systems with high resolution physiological measurements,” in EEEIC 2016 – International Conference on Environment and Electrical Engineering, 2016.
[11] M. R. M. Cruz, D. Z. Fitiwi, S. F. Santos, and J. P. S. Catalao, “Influence of distributed storage systems and network switching/reinforcement on RES-based DG integration level,” in International Conference on the European Energy Market, EEM, 2016, vol. 2016-July.
[12] Fernando Booth, Liliana Garrido, Esteban Aglietti, Abílio Silva, Pilar Pena, and C. Baudín, “Estudio del Ataque por Corrosión en Materiales Cerámicos del Sistema MgO-CaZrO3,” in “Alafar 2016” Conference, Bariloche, Argentina, 2016.
[13] D. Z. Fitiwi, S. F. Santos, A. W. Bizuayehu, M. Shafie-Khah, and J. P. S. Catalão, “A new dynamic and stochastic distributed generation investment planning model with recourse,” in IEEE Power and Energy Society General Meeting, 2016, vol. 2016-November.
[14] G.C.G Serra, P.N.B. Reis, and J. A. M. Ferreira, “Fatigue Life of Single Lap Joints with Different Adhesives,” in 11th European Adhesion Conference, Euradh 2016,, Glasgow- Escócia, 2016 pp. 478-481.
[15] R. Godina, E. M. G. Rodrigues, E. Pouresmaeil, J. C. O. Matias, and J. P. S. Catalao, “Model predictive control technique for energy optimization in residential sector,” in EEEIC 2016 – International Conference on Environment and Electrical Engineering, 2016.
[16] R. Godina, E. M. G. Rodrigues, M. Shafie-Khah, J. C. O. Matias, and J. P. S. Catalao, “Overloading analysis of an industrial client distribution transformer in a Portuguese Island,” in 2016 IEEE International Energy Conference, ENERGYCON 2016, 2016.
[17] T. Grönstedt et al., “Ultra low emission technology innovations for mid-century aircraft turbine engines,” in Proceedings of the ASME Turbo Expo, 2016, vol. 3.
[18] S. K. Hosseini, M. Mehrasa, S. Taheri, M. Rezanejad, E. Pouresmaeil, and J. P. S. Catalao, “A control technique for operation of single-phase converters in stand-alone operating mode,” in 2016 IEEE Electrical Power and Energy Conference, EPEC 2016, 2016.
[19] J.M. Herrera, A.P. Silva, J.A. Durán Suarez, J. P. R. Peralbo Cano, and Castro-Gomes, “Ceramic Products Manufactured from Tungsten Mine Waste. Fracture of Grain and its Consequences on Applications,” in XV Portuguese Conference on Fracture, Lisbon, 2016.
[20] M. Khenar, E. Pouresmaeil, and J. P. S. Catalao, “Control of voltage source converters in wind farm based multi-terminal HVDC transmission systems,” in Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, 2016, vol. 2016-July.
[21] J. Leitão and D. Pereira, “Absorptive capacity, coopetition and product innovation: A comparative analysis between Italian and Portuguese service firms,” in Proceedings of 2015 International Conference on Industrial Engineering and Systems Management, IEEE IESM 2015, 2016, pp. 1121-1135.
[22] L. M. L. Lourenço, R. A. Pitarma, and D. A. Coelho, “Association of hand size with usability assessment parameters of a standard handheld computer pointing device,” in Occupational Safety and Hygiene IV – Selected, Extended and Revised Contributions from the International Symposium Occupational Safety and Hygiene, 2016, 2016, pp. 339-343.
[23] J. M. Lujano-Rojas, G. J. Osório, J. C. O. Matias, and J. P. S. Catalão, “Wind power forecasting error distributions and probabilistic load dispatch,” in IEEE Power and Energy Society General Meeting, 2016, vol. 2016-November.
[24] J. M. Lujano-Rojas, G. J. Osorio, M. Shafie-Khah, and J. P. S. Catalao, “Analytical solution of dynamic economic dispatch considering wind generation,” in Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, 2016, vol. 2016-July.
[25] M. Carvalhosa, S.P. Beatrice, S. Azevedo, and F. Charrua-Santos, “Proposal of a Lean Index Development in Organizational Contexts,” in World Congress on Engineering and Computer Science, San Francisco, USA, 2016, pp. 986-990.
[26] M. Mehrasa, S. K. Hosseini, S. Taheri, E. Pouresmaeil, and J. P. S. Catalao, “Dynamic performance control of modular multilevel converters in HVDC transmission systems,” in 2016 IEEE Electrical Power and Energy Conference, EPEC 2016, 2016.
[27] M. Mehrasa, M. Rezanejhad, E. Pouresmaeil, J. P. S. Catalao, and S. Zabihi, “Analysis and control of single-phase converters for integration of small-scaled renewable energy sources into the power grid,” in 7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016, 2016, pp. 384-389.
[28] N. Neyestani, M. Y. Damavandi, T. D. P. Mendes, J. P. S. Catalao, and G. Chicco, “Effect of plug-in electric vehicles traffic behavior on multi-energy demand’s dependency,” in 2016 IEEE International Energy Conference, ENERGYCON 2016, 2016.
[29] L. J. R. Nunes, J. C. O. Matias, and J. P. S. Catalao, “Torrefied Biomass Pellets: An alternative fuel for coal power plants,” in International Conference on the European Energy Market, EEM, 2016, vol. 2016-July.
[30] N. G. Paterakis, I. N. Pappi, J. P. S. Catalão, and O. Erdinc, “Optimal operation of smart houses by a real-time rolling horizon algorithm,” in IEEE Power and Energy Society General Meeting, 2016, vol. 2016-November.
[31] O. Petit, C. Xisto, X. Zhao, and T. Grönstedt, “An outlook for radical aero engine intercooler concepts,” in Proceedings of the ASME Turbo Expo, 2016, vol. 3.
[32] E. Rodrigues, H. Leite, N. Silva, and I. Miranda, “Reclosers to Self-Healing schemes in distribution networks: A techno-economic assessment,” in 2016 IEEE International Energy Conference, ENERGYCON 2016, 2016.
[33] S. F. Santos, D. Z. Fitiwi, A. W. Bizuayehu, J. P. S. Catalao, and M. Shafie-Khah, “Optimal integration of RES-based DGs with reactive power support capabilities in distribution network systems,” in International Conference on the European Energy Market, EEM, 2016, vol. 2016-July.
[34] M. Seixas, R. Melicio, and V. M. F. Mendes, “HVDC Power transmission simulation for offshore wind system with three-level converter,” in Proceedings – 2016 IEEE International Power Electronics and Motion Control Conference, PEMC 2016, 2016, pp. 122-127.
[35] M. Shafie-Khah, D. Z. Fitiwi, J. P. S. Catalao, E. Heydarian-Forushani, and M. E. H. Golshan, “Simultaneous participation of Demand Response aggregators in ancillary services and Demand Response eXchange markets,” in Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, 2016, vol. 2016-July.
[36] M. Shafie-Khah et al., “Optimal Demand Response Programs for improving the efficiency of day-ahead electricity markets using a multi attribute decision making approach,” in 2016 IEEE International Energy Conference, ENERGYCON 2016, 2016.
[37] M. Shafie-Khah, M. H. Shoreh, P. Siano, N. Neyestani, M. Yazdani-Damavandi, and J. P. S. Catalao, “Oligopolistic behavior of wind power producer in electricity markets including Demand Response Resources,” in IEEE Power and Energy Society General Meeting, 2016, vol. 2016-November.
[38] M. Shafie-Khah, P. Siano, D. Z. Fitiwi, S. F. Santos, J. P. S. Catalao, and E. Heydarian-Forushani, “Regulatory support of wind power producers against strategic and collusive behavior of conventional thermal units,” in International Conference on the European Energy Market, EEM, 2016, vol. 2016-July.
[39] S. Soleymani, N. Hajibandeh, M. Shafie-Khah, P. Siano, J. M. Lujano-Rojas, and J. P. S. Catãlao, “Impacts of Demand Response on oligopolistic behavior of electricity market players in the day-ahead energy market,” in IEEE Power and Energy Society General Meeting, 2016, vol. 2016-November.
[40] A. Tascikaraoglu et al., “A short-term spatio-temporal approach for Photovoltaic power forecasting,” in Power Systems Computation Conference (PSCC), 2016, 2016, pp. 1-7: IEEE.
[41] A. Tascikaraoglu et al., “A short-term spatio-temporal approach for Photovoltaic power forecasting,” in 19th Power Systems Computation Conference, PSCC 2016, 2016.
[42] C. Viveiros, R. Melicio, J. M. Igreja, and V. M. F. Mendes, “Wind energy conversion system control using distinct controllers for different operating regions,” in 2015 International Conference on Renewable Energy Research and Applications, ICRERA 2015, 2016, pp. 959-964.