Scientific Production 2021

Journal Article            (51)

  1. C. Vieira, A. C. Vieira, A. de O. Mendes, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Mechanical Behavior of Toilet Paper Perforation,” BioResources, Article vol. 16, no. 3, pp. 4846-4861, 2021. https://doi.org/10.3390/polym14173448
  2. Valvez, P. N. B. Reis, L. Susmel, and F. Berto, “Fused filament fabrication-4d-printed shape memory polymers: A review,” Polymers, Review vol. 13, no. 5, pp. 1-25, 2021, Art. no. 701. https://doi.org/10.3390/polym13050701
  3. Valvez, A. Maceiras, P. Santos, and P. N. B. Reis, “Olive stones as filler for polymer- based composites: A review,” Materials, Review vol. 14, no. 4, pp. 1-32, 2021, Art. no. 845. https://doi.org/10.3390/ma14040845
  4. Trancossi, J. C. Pascoa, and S. Sharma, “A CRITICAL REVIEW ON HEAT AND MASS TRANSFER MODELLING OF VIRAL INFECTION AND VIRION EVOLUTION The case of SARS- CoV2,” Thermal Science, Article vol. 25, no. 4 Part A, pp. 2831-2843, 2021. https://doi.org/10.2298/TSCI210614215T
  5. Trancossi, J. Pascoa, and S. Mazzacurati, “Sociotechnical design a review and future interdisciplinary perspectives involving thermodynamics in today societal contest,” International Communications in Heat and Mass Transfer, Article vol. 128, 2021, Art. no. 105622. https://doi.org/10.1016/j.icheatmasstransfer.2021.105622
  6. Trancossi, J. Pascoa, and G. Cannistraro, “Comments on “New insight into the definitions of the Bejan number”,” International Communications in Heat and Mass Transfer, Article vol. 120, 2021, Art. no. 104997. https://doi.org/10.1016/j.icheatmasstransfer.2020.104997
  7. Trancossi, C. Carli, G. Cannistraro, J. Pascoa, and S. Sharma, “Could thermodynamics and heat and mass transfer research produce a fundamental step advance toward and significant reduction of SARS-COV-2 spread?,” International Journal of Heat and Mass Transfer, Article vol. 170, 2021, Art. no. 120983. https://doi.org/10.1016/j.ijheatmasstransfer.2021.120983
  8. Teixeira, V. F. Cardoso, G. Botelho, A. M. Morão, J. Nunes-Pereira, and S. Lanceros- Mendez, “Effect of polymer dissolution temperature and conditioning time on the morphological and physicochemical characteristics of poly(Vinylidene fluoride) membranes prepared by non-solvent induced phase separation,” Polymers, Article vol. 13, no. 23, 2021, Art. no. 4062. https://doi.org/10.3390/polym13234062
  9. Silva, A. Garcez, M. Gomes, A. Morais, T. Lima, F. Santos, and M. Franco, “Active learning “factory of boxes” in the teaching-learning processes in engineering and entrepreneurship,” Journal of Technical Education and Training, Article vol. 13, no. 3, pp. 1-14, 2021. https://publisher.uthm.edu.my/ojs/index.php/JTET/article/view/8488/4439
  10. P. Silva, P. Santos, J. Parente, S. Valvez, and P. N. B. Reis, “Effect of harsh environmental conditions on the impact response of carbon composites with filled matrix by cork powder,” Applied Sciences (Switzerland), Article vol. 11, no. 16, 2021, Art. no. 7436. https://doi.org/10.3390/app11167436
  11. Santos, A. Maceiras, S. Valvez, and P. N. B. Reis, “Mechanical characterization of different epoxy resins enhanced with carbon nanofibers,” Frattura ed Integrita Strutturale, Article vol. 15, no. 55, pp. 198-212, 2021. https://www.fracturae.com/index.php/fis/article/view/2943
  12. P. Santos, D. V. Enrique, V. B. P. Maciel, T. M. Lima, F. Charrua-Santos, and R. Walczak, “The synergic relationship between industry 4.0 and lean management: Best practices from the literature,” Management and Production Engineering Review, Article vol. 12, no. 1, pp. 94-107, 2021. https://dx.doi.org/10.24425/mper.2021.136875
  13. F. Santos, P. D. Gaspar, and H. J. L. Souza, “Measuring the energy efficiency of evaporative systems through a new index—evacop,” Energies, Article vol. 14, no. 9, 2021, Art. no. 2689. https://doi.org/10.3390/en14092689
  14. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Ecoenergetic comparison of HVAC systems in data centers,” Climate, Article vol. 9, no. 3, pp. 1-14, 2021, Art. no. 42. https://doi.org/10.3390/cli9030042
  15. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Refrigeration of COVID-19 vaccines: Ideal storage characteristics, energy efficiency and environmental impacts of various vaccine options,” Energies, Article vol. 14, no. 7, 2021, Art. no. 1849. https://doi.org/10.3390/en14071849
  16. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Evaluation of the thermal performance and energy efficiency of crac equipment through mathematical modeling using a new index cop weued,” Applied Sciences (Switzerland), Article vol. 11, no. 13, 2021, Art. no. 5950. https://doi.org/10.3390/app11135950
  17. Rodrigues, M. Abdollahzadeh, J. C. Pascoa, and P. J. Oliveira, “An experimental study on segmented-encapsulated electrode dielectric-barrier-discharge plasma actuator for mapping ice formation on a surface: A conceptual analysis,” Journal of Heat Transfer, Article vol. 143, no. 1, 2021, Art. no. 011701. https://doi.org/10.1115/1.4048252
  18. N. B. Reis, M. P. Silva, P. Santos, J. Parente, and S. Valvez, “Effect of hostile solutions on the residual fatigue life of kevlar/epoxy composites after impact loading,” Molecules, Article vol. 26, no. 18, 2021, Art. no. 5520. https://doi.org/10.3390/molecules26185520
  19. Pina, P. D. Gaspar, and T. M. Lima, “Decision support system in dynamic pricing of horticultural products based on the quality decline due to bacterial growth,” Applied System Innovation, Article vol. 4, no. 4, 2021, Art. no. 80. https://doi.org/10.3390/asi4040080
  20. R. Pendar and J. C. Páscoa, “Numerical analysis of charged droplets size distribution in the electrostatic coating process: Effect of different operational conditions,” Physics of Fluids, Article vol. 33, no. 3, 2021, Art. no. 033317. https://doi.org/10.1115/FEDSM2022-88033
  21. K. Padhi and F. Charrua‐santos, “6G enabled industrial internet of everything: Towards a theoretical framework,” Applied System Innovation, Article vol. 4, no. 1, pp. 1-30, 2021. Art. no. 11. https://doi.org/10.3390/asi4010011
  22. J. Osório, M. Lotfi, M. Gough, M. Javadi, H. M. D. Espassandim, M. Shafie-khah, and J. P. S. Catalão, “Modeling an electric vehicle parking lot with solar rooftop participating in the reserve market and in ancillary services provision,” Journal of Cleaner Production, Article vol. 318, 2021, Art. no. 128503. https://doi.org/10.1016/j.jclepro.2021.128503
  23. J. Osório, M. Gough, M. Lotfi, S. F. Santos, H. M. D. Espassandim, M. Shafie-khah, and J. P. S. Catalão, “Rooftop photovoltaic parking lots to support electric vehicles charging: A comprehensive survey,” International Journal of Electrical Power and Energy Systems, Review vol. 133, 2021, Art. no. 107274. https://doi.org/10.1016/j.ijepes.2021.107274
  24. L. Lourenço, F. Lanhoso, and D. A. Coelho, “Usability evaluation of slanted computer mice,” International Journal of Environmental Research and Public Health, Article vol. 18, no. 8, 2021, Art. no. 3854.  https://doi.org/10.3390/ijerph18083854
  25. Lotfi, G. Osório, M. Javadi, A. Ashraf, M. Zahran, G. Samih, and J. P. S. Catalao, “A Dijkstra-Inspired Graph Algorithm for Fully Autonomous Tasking in Industrial Applications,” IEEE Transactions on Industry Applications, Article vol. 57, no. 5, pp. 5448-5460, 2021, Art. no. 9462369. https://doi.org/10.1109/EEEIC/ICPSEurope49358.2020.9160688
  26. M. Lopes, R. Laurett, H. Antunes, and J. Oliveira, “Entrepreneurial marketing: a bibliometric analysis of the second decade of the 21st century and future agenda,” Journal of Research in Marketing and Entrepreneurship, Article vol. 23, no. 2, pp. 295-317, 2021. https://doi.org/10.1108/JRME-02-2019-0019
  27. M. Lima and D. A. Coelho, “Gender differences in associating musculoskeletal complaints, housework, electronic device usage and physical exercise for administrative workers,” International Journal of Occupational Safety and Ergonomics, Article 2021. https://doi.org/10.1080/10803548.2021.1878695
  28. Lebre, P. D. Silva, L. C. Pires, and P. D. Gaspar, “Computational modeling of the thermal behavior of a greenhouse,” Applied Sciences (Switzerland), Article vol. 11, no. 24, 2021, Art. no. 11816. https://doi.org/10.3390/app112411816
  29. Kumar, F. Leitão, P. D. Gaspar, and P. D. Silva, “EXPERIMENTAL TESTS OF THE THERMAL BEHAVIOUR OF NEW SUSTAINABLE BIO-PACKAGING FOOD BOXES,” Procedia Environmental Science, Engineering and Management, Article vol. 8, no. 1, pp. 215-223, 2021. http://procedia-esem.eu/pdf/issues/2021/no1/24_02.24.daSilva_21.pdf
  30. Ivanov, U. Monakhova, A. Guerman, M. Ovchinnikov, and D. Roldugin, “Decentralized differential drag based control of nanosatellites swarm spatial distribution using magnetorquers,” Advances in Space Research, Article vol. 67, no. 11, pp. 3489-3503, 2021. https://doi.org/10.1016/j.asr.2020.05.024
  31. Ivanov, U. Monakhova, A. Guerman, and M. Ovchinnikov, “Decentralized control of nanosatellite tetrahedral formation flying using aerodynamic forces,” Aerospace, Article vol. 8, no. 8, 2021, Art. no. 199. https://doi.org/10.3390/aerospace8080199
  32. Ilangovan, J. Curto, P. D. Gaspar, P. D. Silva, and N. Alves, “Cfd modelling of the thermal performance of fruit packaging boxes—influence of vent-holes design,” Energies, Article vol. 14, no. 23, 2021, Art. no. 7990. https://doi.org/10.3390/en14237990
  33. Habibnia Rami and J. C. Pascoa, “Performance Optimization of Forward-Flight and Lift-Up Phases in a Cycloidal Rotor Using an Active Control Mechanism,” Journal of Aerospace Engineering, Article vol. 34, no. 4, 2021, Art. no. 1275. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001275
  34. Habibnia Rami and J. Carlos Pascoa, “Coupled Active Control Technique for Oscillating Blades in a Cycloidal Rotor Using CFD and ANN Analysis by including 3D End Wall Effects,” Journal of Aerospace Engineering, Article vol. 34, no. 6, 2021, Art. no. 04021089. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001332
  35. Habibnia and J. Pascoa, “Active control assessments towards optimizing the performance of a cycloidal rotor at hover,” Aerospace Science and Technology, Article vol. 119, 2021, Art. no. 107141. https://doi.org/10.1016/j.ast.2021.107141
  36. E. Gomes, M. I. D. Iglésias, A. P. Proença, T. M. Lima, and P. D. Gaspar, “Applying a genetic algorithm to a m-tsp: Case study of a decision support system for optimizing a beverage logistics vehicles routing problem,” Electronics (Switzerland), Article vol. 10, no. 18, 2021, Art. no. 2298. https://doi.org/10.3390/electronics10182298
  37. D. Gaspar, R. Godina, and R. Barrau, “Influence of orchard cultural practices during the productive process of cherries through life cycle assessment,” Processes, Article vol. 9, no. 6, 2021, Art. no. 1065. https://doi.org/10.3390/pr9061065
  38. D. Gaspar, C. M. Fernandez, V. N. G. J. Soares, J. M. L. P. Caldeira, and H. Silva, “Development of technological capabilities through the internet of things (Iot): Survey of opportunities and barriers for iot implementation in Portugal’s agro-industry,” Applied Sciences (Switzerland), Article vol. 11, no. 8, 2021, Art. no. 3454. https://doi.org/10.3390/app11083454
  39. D. Gaspar, J. Alves, and P. Pinto, “Simplified approach to predict food safety through the maximum specific bacterial growth rate as function of extrinsic and intrinsic parameters,” ChemEngineering, Article vol. 5, no. 2, 2021, Art. no. 22. https://doi.org/10.3390/chemengineering5020022
  40. M. Fernandez, J. Alves, P. D. Gaspar, and T. M. Lima, “Fostering awareness on environmentally sustainable technological solutions for the post-harvest food supply chain,” Processes, Article vol. 9, no. 9, 2021, Art. no. 1611. https://doi.org/10.3390/pr9091611
  41. P. Curto and P. D. Gaspar, “Traceability in food supply chains: Review and SME focused analysis—Part 1,” AIMS Agriculture and Food, Article vol. 6, no. 2, pp. 679-707, 2021. https://doi.org/10.3934/agrfood.2021041
  42. P. Curto and P. D. Gaspar, “Traceability in food supply chains: SME focused traceability framework for chain-wide quality and safety—Part 2,” AIMS Agriculture and Food, Article vol. 6, no. 2, pp. 708-736, 2021. https://doi.org/10.3934/agrfood.2021042
  43. A. Coelho and M. L. Lourenço, “Dynamics of forearm muscle activity in slanted computer mice use,” Work, Article vol. 68, no. 1, pp. 123-135, 2021. https://content.iospress.com/articles/work/wor203242
  44. M. C. Carneiro, A. Maceiras, J. Nunes-Pereira, P. D. Silva, A. P. Silva, and C. Baudín, “Property characterization and numerical modelling of the thermal conductivity of CaZrO3- MgO ceramic composites,” Journal of the European Ceramic Society, Article vol. 41, no. 14, pp. 7241-7252, 2021. https://doi.org/10.1016/j.jeurceramsoc.2021.06.044
  45. Benmoussa and J. C. Páscoa, “Cycloidal rotor coupled with DBD plasma actuators for performance improvement,” Aerospace Science and Technology, Article vol. 110, 2021, Art. no. 106468. https://doi.org/10.1016/j.ast.2020.106468
  46. Benmoussa and J. C. Páscoa, “Performance improvement and start-up characteristics of a cyclorotor using multiple plasma actuators,” Meccanica, Article vol. 56, no. 11, pp. 2707-2730, 2021. https://doi.org/10.1007/s11012-021-01413-4
  47. Ananias, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Artificial intelligence decision support system based on artificial neural networks to predict the commercialization time by the evolution of peach quality,” Electronics (Switzerland), Article vol. 10, no. 19, 2021, Art. no. 2394. https://doi.org/10.3390/electronics10192394
  48. Alibabaei, P. D. Gaspar, and T. M. Lima, “Crop yield estimation using deep learning based on climate big data and irrigation scheduling,” Energies, Article vol. 14, no. 11, 2021, Art. no. 3004. https://doi.org/10.3390/rs14030638
  49. Alibabaei, P. D. Gaspar, and T. M. Lima, “Modeling soil water content and reference evapotranspiration from climate data using deep learning method,” Applied Sciences (Switzerland), Article vol. 11, no. 11, 2021, Art. no. 5029. https://doi.org/10.3390/app11115029
  50. Akaev, T. Devezas, Y. Ichkitidze, and A. Sarygulov, “Forecasting the labor intensity and labor income share for G7 countries in the digital age,” Technological Forecasting and Social Change, Article vol. 167, 2021, Art. no. 120675. https://doi.org/10.1016/j.techfore.2021.120675
  51. L. Aguiar, P. D. Gaspar, and P. D. Silva, “Testing Of A Resistive Sensor With Fabric Medium For Monitoring Frost Formation In Refrigeration Systems,” Procedia Environmental Science, Engineering and Management, Article vol. 8, no. 1, pp. 205-214, 2021. https://www.procedia-esem.eu/pdf/issues/2021/no1/23_02.23.Gaspar.02_21.pdf

Conference Proceedings        (28)

  1. Trancossi and P. Jose, “Irreversibility Analysis, Design, And Optimization Of A Combined Hybrid Hot Air And Buoyant Gas Baloon For Stratospheric Persistence,” in ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2021, vol. 11.
  2. Tabatabaei, M. S. Nazar, M. Shafie-Khah, G. J. Osorio, and J. P. S. Catalao, “Optimal Scheduling of Microgrid-Based Virtual Power Plants Considering Demand Response and Capacity Withholding Opportunities,” in 2021 IEEE Madrid PowerTech, PowerTech 2021 – Conference Proceedings, 2021.
  3. F. Rodrigues, J. N. Pereira, M. Abdollahzadeh, J. Pascoa, and S. L. Mendez, “Comparative evaluation of dielectric materials for plasma actuators active flow control and heat transfer applications,” in American Society of Mechanical Engineers, Fluids Engineering (Publication) FEDSM, 2021, vol. 3.
  4. F. Rodrigues, M. Moreira, and J. Pascoa, “Analysis and implementation of dielectric barrier discharge plasma actuators for ground vehicles wake reduction,” in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2021, vol. 3.
  5. F. Rodrigues, M. Abdollahzadeh, J. Pascoa, and L. Pires, “Influence of exposed electrode thickness on plasma actuators performance for coupled deicing and flow control applications,” in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2021, vol. 3.
  6. C. G. Reina, S. F. Santos, G. J. Osorio, O. Erdinc, and J. P. S. Catalao, “Assessing the Impact of Peer-to-Peer Markets on Distribution Grid Operation,” in 2021 10th International Conference on Power Science and Engineering, ICPSE 2021, 2021, pp. 50-55.
  7. R. Reigones and P. D. Gaspar, “Real-Time Vital Signs Monitoring System towards Livestock Health Furtherance,” in Proceedings of the 6th International Conference on Inventive Computation Technologies, ICICT 2021, 2021, pp. 753-758.
  8. I. G. Raposo, L. C. C. Pires, J. A. F. Moutinho, P. D. Silva, and A. R. Gouveia, “Development of a Thermographic Database with Images of the Vulva,” in ACM International Conference Proceeding Series, 2021, pp. 32-36.
  9. P. Ramos, M. Vahid-Ghavidel, G. J. Osorio, M. Shafie-Khah, O. Erdinc, and J. P. S. Catalao, “Influence of Demand Response Programs in Microgrids Facing Photovoltaic and Battery Integration,” in 2021 10th International Conference on Power Science and Engineering, ICPSE 2021, 2021, pp. 34-40.
  10. R. Pendar and J. Pascoa, “Numerical Simulation of the Electrostatic Coating Process: The Effect of Applied Voltage, Droplet Charge and Size on the Coating Efficiency,” in SAE Technical Papers, 2021.
  11. R. Pendar and J. Pascoa, “Study of the Plasma Actuator Effect on the Flow Characteristics of an Airfoil: An les Investigation,” in SAE Technical Papers, 2021.
  12. Nunes and F. Brojo, “DEVELOPMENT OF A NOVEL 4-STROKE SPARK IGNITION OPPOSED PISTON ENGINE,” in ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2021, vol. 4.
  13. Michele and J. Pascoa, “FLUENCE AS AN INSTRUMENT TOWARDS A UNIFIED REPRESENTATION OF FLUIDDYNAMIC RELATED PHENOMENA,” in ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2021, vol. 4.
  14. Mendes, T. M. Lima, and P. D. Gaspar, “Lean Tools Selector – A Decision Support System,” in 2021 International Conference on Decision Aid Sciences and Application, DASA 2021, 2021, pp. 45-50.
  15. F. Macedo and A. P. Silva, “Analysis of the effect of doped metal ions in the tricalcium phosphate bioceramic,” in Journal of Physics: Conference Series, 2021, vol. 1960. DOI: 10.1088/1742-6596/1960/1/012014.
  16. Lopes, T. Canhao, M. Antunes, T. M. Lima, and P. D. Gaspar, “Computational decision- making support tool for the optimized application of phytopharmaceuticals,” in 2021 International Conference on Decision Aid Sciences and Application, DASA 2021, 2021, pp. 17-21.
  17. Leitão, S. K. Madhan, P. D. da Silva, and P. D. Gaspar, “Experimental Testing of the Thermal Response of Different Food Alveoli Solutions for Packaging Boxes,” in Lecture Notes in Engineering and Computer Science, 2021, vol. 2242, pp. 268-272.
  18. Hasankhani, S. M. Hakimi, M. Bodaghi, M. Shafie-Khah, G. J. Osorio, and J. P. S. Catalao, “Day-Ahead Optimal Management of Plug-in Hybrid Electric Vehicles in Smart Homes Considering Uncertainties,” in 2021 IEEE Madrid PowerTech, PowerTech 2021 – Conference Proceedings, 2021.
  19. Hamdane, P. D. Silva, L. C. C. Pires, and A. Moummi, “Comparison study between using air data and soil data in predicting soil temperature,” in World Congress in Computational Mechanics and ECCOMAS Congress, 2021, vol. 1200.
  20. M. Guedes Rebelo, R. Emanuel Alves De Sousa, and M. A. Rodrigues Silvestre, “Numerical modeling and experimental validation of a coreless permanent magnet synchronous motor,” in 2021 12th International Conference on Mechanical and Aerospace Engineering, ICMAE 2021, 2021, pp. 298-303.
  21. V. Enrique, J. C. M. Druczkoski, T. M. Lima, and F. Charrua-Santos, “Advantages and difficulties of implementing Industry 4.0 technologies for labor flexibility,” in Procedia Computer Science, 2021, vol. 181, pp. 347-352.
  22. Curto, A. Ilangovan, P. D. Gaspar, P. D. Silva, and N. Alves, “Numerical study of the impact on cooling behaviour of vent-holes design of fruit packaging boxes,” in World Congress in Computational Mechanics and ECCOMAS Congress, 2021, vol. 600, pp. 1-14.
  23. Candido and J. C. Pascoa, “Numerical Simulation Of Electrified Liquid Jets Using A Geometrical Vof Method,” in ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2021, vol. 10.
  24. Agostinho, H. Guilherme, S. Marcelino, T. M. Lima, and P. D. Gaspar, “Decision Support System for the Application of Lean Healthcare in Stock Management in Health Facilities,” in 2021 International Conference on Decision Aid Sciences and Application, DASA 2021, 2021, pp. 886-891.
  25. Leonardo Marchiori, André Studart, António Alburquerque, Victor Cavaleiro and Abílio Silva, Geotechnical Characterization of Water Treatment Sludge for Liner Material Production and Soft Soil Reinforcement, Materials Science Forum, 2021, Vol. 1046, pp 83-88. DOI: 10.4028/www.scientific.net/MSF.1046.83.
  26. Massochy Ventura, Abílio Silva, Pedro Rosa, Jaime Vilinga e Herminio Faias, Escudos cerâmicos em sistemas de dupla camada, 3º Encontro de ID&I em Ciências Militares, Sessão S1B – Tecnologia Militar, Academia Militar, Lisboa, 22 de Novembro
  27. Razoumny, F. Graziani, A. D. Guerman, and J. M. Contant, “Foreword,” Advances in the Astronautical Sciences, Editorial vol. 174, pp. 14-24, 2021.
  28. Morais, M. L. Aguiar, P. D. Gaspar, and P. D. Silva, “DEVELOPMENT OF A MONITORING DEVICE FOR FRUIT PRODUCTS TRANSPORTATION IN THE COLD CHAIN,” Procedia Environmental Science, Engineering and Management, Article vol. 8, no. 1, pp. 195-204, 2021

Book Chapters Serial (10)

  1. Matos, V. Maciel, C. M. Fernandez, T. M. Lima, and P. D. Gaspar, “Decision Support System to Assign Price Rebates of Fresh Horticultural Products Based on Quality Decay,” in Modeling and Optimization in Science and Technologies vol. 18, ed, 2021, pp. 487-497.
  2. Marchiori, A. Studart, A. Albuquerque, V. Cavaleiro, and A. Silva, “Geotechnical characterization of water treatment sludge for liner material production and soft soil reinforcement,” in Materials Science Forum vol. 1046 MSF, ed, 2021, pp. 83-88.
  3. Devezas and H. Ruão, “Aluminum Production and Aviation: An Interesting Case of an Interwoven Rebound Effect in a Digital Transforming World,” in Studies on Entrepreneurship, Structural Change and Industrial Dynamics, ed, 2021, pp. 251-281.
  4. Devezas, J. Leitão, and A. Sarygulov, “The Economics of Digital Transformation: Approaching Non-stable and Uncertain Digitalized Production Systems,” in Studies on Entrepreneurship, Structural Change and Industrial Dynamics, ed, 2021, pp. 1-4.
  5. Cunha, P. D. Gaspar, E. Assunção, and R. Mesquita, “Prediction of the Vigor and Health of Peach Tree Orchard,” in Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) vol. 12951 LNCS, ed, 2021, pp. 541-551.
  6. A. Alves, P. J. Oliveira, and F. T. Pinho, “Numerical Methods for Viscoelastic Fluid Flows,” in Annual Review of Fluid Mechanics vol. 53, ed, 2021, pp. 509-541.
  7. А. А. Akaev, A. I. Rudskoy, and Devezas, “Technological Substitution of Jobs in the Digital Economy and Shift in Labor Demand Towards Advanced Qualifications,” in Studies on Entrepreneurship, Structural Change and Industrial Dynamics, ed, 2021, pp. 85-103.
  8. Akaev, A. Rudskoy, and T. Devezas, “Social and Economic Consequences of Large-scale Digitization and Robotization of the Modern Economy,” in Studies on Entrepreneurship, Structural Change and Industrial Dynamics, ed, 2021, pp. 5-23.
  9. Akaev, T. Devezas, L. Ungvari, and A. Petryakov, “Evaluation algorithm of probabilistic transformation of a random variable,” in Lecture Notes in Networks and Systems vol. 157, ed, 2021, pp. 77-88.