[1] Alves, J.; T. M. Lima; P. D. Gaspar. “Novel approach for ergonomic assessment of musculoskeletal risks for OHS in high-demand and complex manual tasks − case study of polishing industry”. Safety Science. https://doi.org/10.1016/j.ssci.2025.106969

[2] Ana Paula Duarte; Pedro R. da Costa; Manuel Freitas. “Multi-Layer Laminate of Fibreglass Thermoplastic Composite Reinforced with Fused Filament Fabrication TPU Layers”. Polymers. https://doi.org/10.3390/polym17192622

[3] B. Szczucka-Lasota; T. Węgrzyn; J. Kamińska; A. P. Silva; B. Lazarz. “Super Duplex – AHSS Welding for Electric Vehicles”. Transport Problems, vol. 20, no. 1, pp. 59-71. https://doi.org/10.20858/tp.2025.20.1.06

[4] Benmoussa, A.; Pendar, M.-R.; J. C. Pascoa. “Enhancing electrostatic spray-painting efficiency with modified high-voltage conductors: A numerical study on pulsed electric fields”. Journal of Aerosol Science, vol. 184. https://doi.org/10.1016/j.jaerosci.2024.106491

[5] Cardoso, Fábio; Carvalho, Daniel; P. D. Gaspar; Vasco N. G. J. Soares; João M. L. P. Caldeira. “A Study on Acoustic Bird Detection in the Context of Smart Agriculture”. Journal of Systems and Computing – Revista de Sistemas e Computação. https://revistarsc.com.br/ojs/index.php/rsc/article/view/85

[6] Chao Yang; Wei Ye; P. D. Gaspar; Wenyong Yu; Qiaohong Chen; Yebo Lu. “A computationally efficient and novel closed-form model for inverse dynamics of over-constrained parallel manipulators”. Mechanism and Machine Theory. https://doi.org/10.1016/j.mechmachtheory.2025.106144

[7] Coimbra, A.; Gallardo, Eugenia; Luís, Ângelo; P. D. Gaspar; Ferreira, Susana; Ana Paula Duarte. “Bioactive Potential of Wild Plants from Gardunha Mountain: Phytochemical Characterization and Biological Activities”. Molecules. https://doi.org/10.3390/molecules30193876

[8] Coimbra, A.; Luís, Ângelo; P. D. Gaspar; Ferreira, Susana; Ana Paula Duarte. “Assessment of the Antimicrobial Activity of Cistus salviifolius L. and Helichrysum stoechas (L.) DC Extracts and Their Synergistic Potential with Conventional Antibiotics Against Staphylococcus aureus”. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms262311331

[9] D. S. Cardoso; Fael, Paulo; P. D. Gaspar; Espírito Santo, A. “Balancing Cam Mechanism for Instantaneous Torque and Velocity Stabilization in Internal Combustion Engines: Simulation and Experimental Validation”. Energies. https://doi.org/10.3390/en18133256

[10] Diogo Loureiro Martinho; M. Abdollahzadehsangroudi; Samuel Simon Araya; Torsten Berning. “Eulerian-Eulerian CFD Modeling of Multiphase Flow and Heat Transfer in Alkaline Electrolysis Cells”. Journal of The Electrochemical Society. https://doi.org/10.1149/1945-7111/addb7f

[11] Duarte F. Macedo; Mariana B. Oliveira; Filipe Oliveira; A. P. Silva. “Numerical 3D simulation of the porous microstructures of ß-TCP using accessible tools: A Young modulus approach”. Journal of the American Ceramic Society. https://doi.org/10.1111/jace.20535

[12] Eduardo E. Eliseu; T. M. Lima; P. D. Gaspar. “A KPI-Based Framework for Evaluating Sustainable Agricultural Practices in Southern Angola”. Sustainability. https://doi.org/10.3390/su17157019

[13] Farideh Ghanavati; Gerardo J. Osório; João C. O. Matias; João P. S. Catalão. “Transactive data-driven and consumer-centric home energy management system for local energy communities in Portugal”. Sustainable Cities and Society. https://doi.org/10.1016/j.scs.2025.106698

[14] Fatemeh Bagherighajari; M. Abdollahzadehsangroudi; J. C. Pascoa. “Methane/Air Flame Control in Non-Premixed Bluff Body Burners Using Ring-Type Plasma Actuators”. Actuators. https://doi.org/10.3390/act14020047

[15] Gomes, D.; Espírito Santo, A.; J. C. Pascoa. “A sparse and decoupled supervision framework for multi-field reconstruction in turbulent flows using physics-informed neural networks”. Physics of Fluids, vol. 37, no. 7. https://doi.org/10.1063/5.0269730

[16] Guilherme F. S. Pangas; P. Gamboa. “Low-Speed Airfoil Optimization for Improved Off-Design Performance”. Aerospace. https://doi.org/10.3390/aerospace12080685

[17] Guimarães, A.; Gomes, D.; André F. C. Vieira; Serafim M. Oliveira. “Effect of Laser Parameters on Through-Thickness Local Hardness of Polypropylene Plates”. Materials. https://doi.org/10.3390/ma18112638

[18] Gustavo Nunes; Miguel Moreira; F. F. Rodrigues; J. C. Pascoa. “Experimental Analysis of Electrohydrodynamic Jet Actuation Modes Based on the Phase Doppler Technique”. Actuators. https://doi.org/10.3390/act14030141

[19] Igor E. Anufriev; Bulat Khusainov; Andrea Tick; Tessaleno Devezas; Askar Sarygulov; Sholpan Kaimoldina. “Mathematical Model for Assessing New, Non-Fossil Fuel Technological Products (Li-Ion Batteries and Electric Vehicle)”. Mathematics. https://doi.org/10.3390/math13010143

[20] J. Henrique Lopes; Pedro R. da Costa; Manuel Freitas; Luís Reis. “Review on the Fatigue Strength of Additively Manufactured Metal Materials Under the Very High Cycle Fatigue”. Fatigue & Fracture of Engineering Materials & Structures. https://doi.org/10.1111/ffe.14532

[21] J. J. D. S. Filho; P. D. Gaspar; Paço, Arminda; S. M. Marcelino. “Governance-Centred Industrial Symbiosis for Circular Economy Transitions: A Rural Forest Biomass Hub Framework Proposal”. Sustainability. https://doi.org/10.3390/su17125659

[22] J. J. D. S. Filho; Paço, Arminda; P. D. Gaspar. “Artificial Intelligence and MCDA in Circular Economy: Governance Strategies and Optimization for Reverse Supply Chains of Solid Waste”. Applied Sciences. https://doi.org/10.3390/app15094758

[23] J. M. Parente; A. P. Silva; P. N. B. Reis. “The influence of carbon and glass fiber hybridization combined with a graphene-enhanced epoxy matrix on bending fatigue response”. International Journal of Fatigue. https://doi.org/10.1016/j.ijfatigue.2024.108782

[24] J. M. Parente; J. Nunes-Pereira; A. P. Silva; P. N. B. Reis. “Synergistic effects of graphene and carbon nanotubes on the piezoresistive strain sensing of epoxy composite laminates under bending loads”. Composites Part A: Applied Science and Manufacturing. https://doi.org/10.1016/j.compositesa.2025.109136

[25] João C. Silva; F. Brójo. “Multi-altitude performance evaluation of axisymmetric propulsive nozzles with high divergence angles”. Journal of the Brazilian Society of Mechanical Sciences and Engineering. https://doi.org/10.1007/s40430-025-05759-8

[26] João C. Velosa; A. P. Silva; Geoffrey R. Mitchell; Joana M. R. Curto. “Simulation Studies to Compare Innovative Cellulose-Based Fibers Composites Printed Circuit Border with Glass Fibres”. Key Engineering Materials. http://dx.doi.org/10.4028/p-2aufd2

[27] João Laia Antunes; Silva, Pedro D.; P. D. Gaspar. “Thermal Behavior of Alveoli with Phase Change Materials in Fruit Packaging”. Applied Sciences. https://doi.org/10.3390/app15041924

[28] José Nunes; Silva, Pedro D.; Luís Andrade; P. D. Gaspar; Pinar Cuce; Erdem Cuce; Yusuf Yilmaz. “Energy Efficiency in Portuguese Traditional Cheese Industries: A Comprehensive Case Study”. Energies. https://doi.org/10.3390/en18030562

[29] José Pedro Teixeira; Silva, Pedro D.; L. Pires; P. D. Gaspar. “Comparative Analysis of Passive Thermal Solutions for Building Resilience Under Future Climate Scenarios”. Energies. https://doi.org/10.3390/en18215693

[30] Kateryna O. Shvydyuk; F. F. Rodrigues; J. Nunes-Pereira; J. C. Pascoa; Abílio P. Silva. “Thermal Characterization of Ceramic Composites for Optimized Surface Dielectric Barrier Discharge Plasma Actuators”. Actuators. https://doi.org/10.3390/act14030127

[31] Kateryna Oleksandrivna Shvydyuk; Senentxu Lanceros-Mendez; A. P. Silva. “Advanced Ceramics in Aerospace and Defense: The Interrelationship between Traditional and Additive Manufacturing Approaches”. Advanced Materials Technologies. https://doi.org/10.1002/admt.202501012

[32] L. A. Mbanguine; F. F. Rodrigues; J. C. Páscoa. “Experimental analysis of dielectric thickness influence on novel electro-active polymer plasma actuators (EAP-PA) for flow control and ice removal systems”. Sensors and Actuators A: Physical. https://doi.org/10.1016/j.sna.2025.116706

[33] L. A. Mbanguine; F. F. Rodrigues; J. C. Páscoa. “New Electro-Active Polymers-Based Plasma Actuators for Simultaneous Flow Control and Ice Protection”. Journal of Fluids Engineering, vol. 147, no. 7. http://dx.doi.org/10.1115/1.4067786

[34] L. Lang; R. Antunes; T. A. Dutra; M. L. De Aguiar; N. Pereira; P. D. Gaspar. “Mechanical Characterization and Computational Analysis of TPU 60A: Integrating Experimental Testing and Simulation for Performance Optimization”. Materials. https://doi.org/10.3390/ma18020240

[35] M. L. De Aguiar; P. D. Gaspar; Silva, Pedro D. “Mitigating Electrochemical Effects in Resistive Frost-Detection Sensors”. Applied Sciences. https://doi.org/10.3390/app15084110

[36] M. Moreira; F. F. Rodrigues; J. C. Pascoa. “An experimental study on the use of dielectric barrier discharge plasma actuators for electrospray dynamics enhancement”. Physics of Fluids. https://doi.org/10.1063/5.0248754

[37] Mariusz Winiecki; Gabriel Costa; Iwona Pudelko-Prazuch; Katarzyna Reczynska-Kolman; Elzbieta Pamula; Marta Michalska-Sionkowska; Natanael F. Fernandes; Abílio P. Silva. “Effects of Ta5+/Sr2+ co-doping on physicochemical, microstructural, mechanical, osteogenic, and antibacterial properties of ß-tricalcium phosphate”. Applied Materials Today. https://doi.org/10.1016/j.apmt.2025.102977

[38] Mohammad-Reza Pendar; Silvio Cândido; J. C. Pascoa; Rui Lima. “Enhancing Automotive Paint Curing Process Efficiency: Integration of Computational Fluid Dynamics and Variational Auto-Encoder Techniques”. Sustainability. https://doi.org/10.3390/su17073091

[39] Odelma Teixeira; J. C. Pascoa. “Numerical Analysis of a Hypersonic Body Under Thermochemical Non-Equilibrium and Different Catalytic Surface Conditions”. Actuators. https://doi.org/10.3390/act14020102

[40] Odelma Teixeira; J. C. Pascoa; Carlo Purpura. “Numerical model validation and aerodynamic MHD performance assessment with novel designs of contoured nozzles for hypersonic plasma wind tunnel testing”. Aerospace Science and Technology. https://doi.org/10.1016/j.ast.2025.110439

[41] Oliveira, P.; F. Brójo; Serôdio, R.; Serôdio, J. “Investigation of Water-in-Diesel Emulsion Behavior Formulated for Performance Conditions in a Single-Cylinder Diesel Engine”. Energies, vol. 18, no. 4. https://doi.org/10.3390/en18040934

[42] P. Pires; M. L. Aguiar; André F. C. Vieira. “Mechanical Performance of rPET Filament Obtained by Thermal Drawing for FFF Additive Manufacturing”. Journal of Manufacturing and Materials Processing. https://doi.org/10.3390/jmmp9010026

[43] P. G. Batista; André F. C. Vieira; P. D. Gaspar. “Robotic Prostheses and Neuromuscular Interfaces: A Review of Design and Technological Trends”. Machines. https://doi.org/10.3390/machines13090804

[44] Pedro R. da Costa; M. Freitas. “Failure analysis by keyway stress concentration of a pickling decoiler machine output shaft”. Engineering Failure Analysis. https://doi.org/10.1016/j.engfailanal.2025.109515

[45] Pedro R. da Costa; V. Infante; M. Freitas. “Investigation of a premature failure axle from a road-rail truck under rotary bending fatigue”. Engineering Failure Analysis. https://doi.org/10.1016/j.engfailanal.2025.109464

[46] Proenca, Maria da Conceicao; Rebelo, Maria Teresa; Valent, Riccardo; Mateus, Rebeca; P. D. Gaspar; Lopes, Carlos Manuel; Franco, Jose Carlos. “Identification of green leafhoppers (Cicadellidae) in vineyards through an automatic image acquisition system from yellow sticky traps associated with deep-learning”. Ciência e Técnica Vitivinícola. https://doi.org/10.1051/CTV/CTV2025400101

[47] R. Lima; P. Costa; J. Nunes-Pereira; A. P. Silva; C. R. Tubio; S. Lanceros-Mendez. “Additive manufacturing of multifunctional epoxy adhesives with self-sensing piezoresistive and thermoresistive capabilities”. Composites Part B: Engineering, vol. 293, Art. no. 112130. https://doi.org/10.1016/j.compositesb.2025.112130

[48] Ricardo José da Silva Lima; João Pedro Cruz Serra; Carlos Miguel Costa; Tubio, C. R.; J. Nunes-Pereira; Lanceros-Mendez, Senentxu; Pedro Filipe Ribeiro da Costa. “Effect of carbonaceous filler type and content on the piezoresistive response of screen-printed sustainable adhesive epoxy composites”. Reactive and Functional Polymers, vol. 215. https://doi.org/10.1016/j.reactfunctpolym.2025.106375

[49] Ricardo José da Silva Lima; Luís Amorim; J. Nunes-Pereira; Carmen Rial Tubio; Lanceros-Mendez, Senentxu; Pedro Filipe Ribeiro da Costa. “Development of thermo- and piezoresistive responses in epoxy resin-based adhesives”. Polymer Composites. https://doi.org/10.1002/pc.29924

[50] Rodrigo G. Ferreira; A. P. Silva; J. Nunes-Pereira. “Conductive and Elastomeric rGO@PDMS Piezoresistive Composite for Flexible Strain Sensing Applications: Joint Motion and Breathing Pattern Monitoring”. ACS Applied Electronic Materials. https://doi.org/10.1021/acsaelm.5c00528

[51] Santos, Diogo; Paulo Torrão Fiadeiro; A. P. Silva; J. Nunes-Pereira. “Multifunctional Magnetic Soft Actuators for Aerospace Applications: Morphing Structures and Biomimetics”. Advanced Materials Technologies. https://doi.org/10.1002/admt.202501180

[52] Sérgio M. O. Tavares; P. Gamboa; Paulo M. S. T. de Castro. “Aircraft Wings and Morphing–Evolution of the Concepts”. Encyclopedia. https://doi.org/10.3390/encyclopedia5030101

[53] Sina Safari; Diogo Montalvão; Pedro R. da Costa; Luís Reis; Manuel Freitas. “Statistical calibration of ultrasonic fatigue testing machine and probabilistic fatigue life estimation”. International Journal of Fatigue. https://doi.org/10.1016/j.ijfatigue.2025.109028

[54] Sofia Gomes; Paulo Santos; T. M. Lima. “Development of Sustainable Composite Sandwich with Wood Waste and Natural Fibers for Circular Economy Applications”. Recycling. https://doi.org/10.3390/recycling10040131

[55] Sofia Sousa; Miguel M. Silva; P. D. Gaspar. “Implementation of SMED Workshops: A Strategic Approach in the Automotive Sector”. Applied Sciences. https://doi.org/10.3390/app15168943

[56] Tessaleno Devezas. “Logistic-Based Forecasting Exercise on the Availability of the Materials Currently Identified as the Most Critical for the Energy Transition”. Energies. https://doi.org/10.3390/en18174686

[1] M. Abdollahzadehsangroudi, M. Francisco, R. Lopes, F. Dolati, J. C. Pascoa, and F. Rodrigues, “Insight into porous fin microchannel heat sinks with improved thermo-hydraulic performance,” Physics of Fluids, Article vol. 36, no. 4, 2024, Art. no. 042015. https://doi.org/10.1063/5.0198294

[2] J. Alves, T. M. Lima, and P. D. Gaspar, “The sociodemographic challenge in human-centred production systems–a systematic literature review,” Theoretical Issues in Ergonomics Science, Review vol. 25, no. 1, pp. 44-66, 2024. https://doi.org/10.1080/1463922X.2022.2148178

[3] A. A. Burov, A. D. Guerman, and V. I. Nikonov, “Approximation for attraction field of almost dynamically symmetrical body by three almost collinear balls,” Acta Astronautica, Article vol. 216, pp. 102-104, 2024. https://doi.org/10.1016/j.actaastro.2023.12.005

[4] S. Cândido and J. C. Páscoa, “Data-driven surrogate modelling of multistage Taylor cone-jet dynamics,” Physics of Fluids, Article vol. 36, no. 5, 2024, Art. no. 052102. https://doi.org/10.1063/5.0205454

[5] A. R. Caramelo, P. Santos, and T. M. Lima, “From Generation to Reuse: A Circular Economy Strategy Applied to Wind Turbine Production,” Designs, Article vol. 8, no. 2, 2024, Art. no. 32. https://doi.org/10.3390/designs8020032

[6] T. Chekifi, M. Boukraa, and A. Benmoussa, “Artificial Intelligence for Thermal Energy Storage Enhancement: A Comprehensive Review,” Journal of Energy Resources Technology, Transactions of the ASME, Article vol. 146, no. 6, 2024, Art. no. 060802. https://doi.org/10.1115/1.4065197

[7] A. Corceiro, N. Pereira, K. Alibabaei, and P. D. Gaspar, “Leveraging Machine Learning for Weed Management and Crop Enhancement: Vineyard Flora Classification,” Algorithms, Article vol. 17, no. 1, 2024, Art. no. 19. https://doi.org/10.3390/a17010019

[8] C. Costa, P. Lopes, J. Castro, J. R. Matos, H. Lopes, J. R. Gouveia, S. M. Pinto, I. Ribeiro, L. Oliveira, and T. A. Dutra, “High-performance thermoplastics obtained by fused filament fabrication: effects of harsh environmental conditions of power transformers,” Progress in Additive Manufacturing, Article 2024. http://dx.doi.org/10.1007/s40964-024-00614-z

[9] A. K. de Almeida, S. Aljbaae, T. Vaillant, J. M. Piñeros, B. Coelho, D. Barbosa, M. Bergano, J. Pandeirada, F. C. Carvalho, L. B. T. Santos, A. F. B. A. Prado, A. Guerman, and A. C. M. Correia, “Theory of Functional Connections and Nelder–Mead optimization methods applied in satellite characterization,” Acta Astronautica, Article vol. 215, pp. 548-559, 2024. https://doi.org/10.1016/j.actaastro.2023.12.033

[10] A. K. de Almeida, T. Vaillant, V. M. de Oliveira, D. Barbosa, D. Maia, S. Aljbaae, B. Coelho, M. Bergano, J. Pandeirada, A. F. B. A. Prado, A. Guerman, and A. C. M. Correia, “Tangential velocity constraint for orbital maneuvers with Theory of Functional Connections,” Scientific Reports, Article vol. 14, no. 1, 2024, Art. no. 7479. https://doi.org/10.1038/s41598-024-57986-z

[11] R. G. Ferreira, A. P. Silva, and J. Nunes-Pereira, “Current On-Skin Flexible Sensors, Materials, Manufacturing Approaches, and Study Trends for Health Monitoring: A Review,” ACS Sensors, Review vol. 9, no. 3, pp. 1104-1133, 2024. https://www.oejournal.org//article/doi/10.29026/oea.2023.220172

[12] J. J. D. S. Filho, P. D. Gaspar, A. C. D. Souza, and A. D. Paço, “Circular Economy in Guaiamum and Uçá Crab Waste in Brazil: Potential By-Products—A Systematic Literature Review,” Resources, Review vol. 13, no. 3, 2024, Art. no. 46. https://doi.org/10.3390/resources13030046

[13] A. S. Gomes, P. T. Fiadeiro, A. C. Vieira, and J. C. Vieira, “Viability Study of Serra da Estrela Dog Wool to Produce Green Composites,” Polymers, Article vol. 16, no. 5, 2024, Art. no. 718. https://doi.org/10.3390/polym16050718

[14] C. Gomes, I. Pires, L. Monteiro, T. M. Lima, and P. D. Gaspar, “Empowering Eco-Friendly Choices: An Environmental Impact Assessment Decision Support System for Textiles and Clothing,” Applied Sciences (Switzerland), Article vol. 14, no. 2, 2024, Art. no. 659. https://doi.org/10.3390/app14020659

[15] J. Lemos, V. B. de Souza, F. S. Falcetta, F. K. de Almeida, T. M. Lima, and P. D. Gaspar, “Enhancing Workplace Safety through Personalized Environmental Risk Assessment: An AI-Driven Approach in Industry 5.0,” Computers, Article vol. 13, no. 5, 2024, Art. no. 120. https://doi.org/10.3390/computers13050120

[16] S. M. Marcelino, P. D. Gaspar, A. do Paço, T. M. Lima, A. Monteiro, J. C. Franco, E. S. Santos, R. Campos, and C. M. Lopes, “Towards Sustainable Agriculture: A Critical Analysis of Agrobiodiversity Assessment Methods and Recommendations for Effective Implementation,” Applied Sciences (Switzerland), Review vol. 14, no. 6, 2024, Art. no. 2622. https://doi.org/10.3390/app14062622

[17] T. Morão and F. Brójo, “NUMERICAL MODELING OF THE PERFORMANCE OF A PARAFFIN HYBRID ROCKET MOTOR,” International Journal of Energetic Materials and Chemical Propulsion, Article vol. 23, no. 3, pp. 1-14, 2024. https://doi.org/10.1615/IntJEnergeticMaterialsChemProp.2023047152

[18] S. B. M. Nery, S. M. Araújo, B. G. Magalhães, K. J. S. de Almeida, and P. D. Gaspar, “Parkinson’s Disease Severity Index Based on Non-Motor Symptoms by Self-Organizing Maps,” Electronics (Switzerland), Article vol. 13, no. 8, 2024, Art. no. 1523. https://doi.org/10.3390/electronics13081523

[19] P. Oliveira and F. Brójo, “An Experimental Study on the Performance and Emissions of an 8% Water-in-Diesel Emulsion Stabilized by a Hydrophilic Surfactant Blend,” Energies, Article vol. 17, no. 6, 2024, Art. no. 1328. https://doi.org/10.3390/en17061328

[20] J. M. Parente, R. Simoes, A. P. Silva, and P. N. B. Reis, “Impact of the Curing Temperature on the Manufacturing Process of Multi-Nanoparticle-Reinforced Epoxy Matrix Composites,” Materials, Article vol. 17, no. 8, 2024, Art. no. 1930. https://doi.org/10.3390/ma17081930

[21] K. Periyadurai, J. C. Pascoa, M. Abdollahzadehsangroudi, and P. J. Oliveira, “Numerical modeling of magnetohydrodynamic non-Newtonian flow in a cross-slot,” Polymer Engineering and Science, Article vol. 64, no. 5, pp. 2157-2177, 2024. https://doi.org/10.1002/pen.26683

[22] H. Rocha, T. Campos, and P. Gamboa, “Design and analysis of air launched fire-extinguishing devices,” CEAS Aeronautical Journal, Article 2024. https://ui.adsabs.harvard.edu/link_gateway/2024CEAAJ.tmp…46R/https://doi.org/10.1007/s13272-024-00735-9

[23] F. F. Rodrigues, K. O. Shvydyuk, J. Nunes-Pereira, J. C. Páscoa, and A. P. Silva, “Plasma Actuators Based on Alumina Ceramics for Active Flow Control Applications,” Ceramics, Article vol. 7, no. 1, pp. 192-207, 2024. http://dx.doi.org/10.3390/ceramics7010012

[24] G. J. M. Rosa, J. M. S. Afonso, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Detecting Wear and Tear in Pedestrian Crossings Using Computer Vision Techniques: Approaches, Challenges, and Opportunities,” Information (Switzerland), Review vol. 15, no. 3, 2024, Art. no. 169. https://doi.org/10.3390/info15030169

[25] K. O. Shvydyuk, J. Nunes-Pereira, F. F. Rodrigues, J. C. Páscoa, S. Lanceros-Mendez, and A. P. Silva, “Holistic Characterization of MgO-Al2O3, MgO-CaZrO3, and Y2O3-ZrO2 Ceramic Composites for Aerospace Propulsion Systems,” Ceramics, Article vol. 7, no. 1, pp. 364-384, 2024. https://doi.org/10.3390/ceramics7010023

[26] G. Silva, T. Assis Dutra, J. Nunes-Pereira, and A. P. Silva, “Coupled and decoupled structural batteries: A comparative analysis,” Journal of Power Sources, Review vol. 604, 2024, Art. no. 234392. https://doi.org/10.1016/j.jpowsour.2024.234392

[27] B. Szczucka-Lasota, T. Węgrzyn, T. Szymczak, B. Łazarz, A. Pereria Silva, and A. Jurek, “Welding of P355NH steel for the construction of a medium-pressure gas pipeline,” Continuum Mechanics and Thermodynamics, Article vol. 36, no. 1, pp. 107-118, 2024. http://dx.doi.org/10.1007/s00161-023-01265-1

[28] J. Videira, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “A Mobile Application for Detecting and Monitoring the Development Stages of Wild Flowers and Plants,” Informatica (Slovenia), Article vol. 48, no. 6, pp. 43-58, 2024. http://dx.doi.org/10.31449/inf.v48i6.5645

[1] R. Antunes, L. Lang, M. L. De Aguiar, T. A. Dutra, and P. D. Gaspar, “Enhancing the Performance of Fin Ray Effect Soft Robotic Finger via Computational Design and Simulation,” in 2024 IEEE International Conference on Autonomous Robot Systems and Competitions, ICARSC 2024, 2024, pp. 189-194.

[2] A. Benmoussa and P. V. Gamboa, “Flight Simulation of a Hybrid Electric Propulsion VTOL UAV for Mission Performance Assessment,” in Advances in Science and Technology, 2024, vol. 144, pp. 81-91.

[3] O. Teixeira and J. Pascoa, “Computational Modelling of Hypersonic Nozzles: The Influence of Enthalpy on the Flow Thermochemistry,” in SAE Technical Papers, 2024.

[1] E. Shlyakhto, I. Ilin, T. Devezas, J. C. C. Leitão, and S. Cubico, “Preface,” in Contributions to Management Science vol. Part F2867, ed, 2024, pp. v-xi.

[2] T. Węgrzyn, B. Szczucka-Lasota, and A. Silva, “Mag Welding of High-Strength Civil Constructions,” in Lecture Notes in Civil Engineering vol. 444, ed, 2024, pp. 601-608.

[1] M. L. Aguiar, P. D. Gaspar, and P. D. da Silva, “Thermal Management of Short-Range Distribution of Perishable Food Products Using Phase Change Materials in Packaging: Real-Time Field Data Acquisition,” Energies, vol. 16, no. 13, 2023, Art. no. 5191. https://doi.org/10.3390/en16135191

[2] M. L. Aguiar, P. D. Gaspar, and P. D. Silva, “Optimized Placement of Frost-Measuring Sensors in Heat Exchangers via Image Processing of Frost Formation Pattern,” Sensors, vol. 23, no. 11, 2023, Art. no. 5253. https://doi.org/10.3390/s23115253

[3] Bozena Szczucka-Lasota, Tomasz Wegrzyn, Tadeusz Szymczak, Bogusław Łazarz, Abílio Pereira Silva, and Adam Jurek, “Welding of P355NH steel for the construction of a medium-pressure gas pipeline,” Continuum Mechanics and Thermodynamics, 2023. https://doi.org/10.1007/s00161-023-01265-1

[4] V. M. Ferro, B. C. Silva, D. F. Macedo, N. F. Fernandes, and A. P. Silva, “TCP Doped with Metal Ions Reinforced with Tetragonal and Cubic Zirconia,” Biomimetics, vol. 8, 2023, Art. no. 599. https://doi.org/10.3390/biomimetics8080599

[5] M. T. Aleluia, V. N. G. J. Soares, J. M. L. P. Caldeira, and P. D. Gaspar, “Livestock Monitoring Prototype Implementation and Validation,” Revista de Informática Teórica e Aplicada, vol. 30, no. 1, pp. 53-65, 2023. https://doi.org/10.22456/2175-2745.127207

[6] K. Alibabaei, P. D. Gaspar, R. M. Campos, G. C. Rodrigues, and C. M. Lopes, “Evaluation of a Deep Learning Approach for Predicting the Fraction of Transpirable Soil Water in Vineyards,” Applied Sciences, vol. 13, no. 5, 2023, Art. no. 2815. https://doi.org/10.3390/app13052815

[7] J. Alves, P. D. Gaspar, T. M. Lima, and P. D. Silva, “What is the role of active packaging in the future of food sustainability? A systematic review,” Journal of the Science of Food and Agriculture, vol. 103, no. 3, pp. 1004-1020, 2023. https://doi.org/10.1002/jsfa.11880

[8] J. Alves, T. M. Lima, and P. D. Gaspar, “Novel Design of Assistive Technologies Based on the Interconnection of Motion Capture and Virtual Reality Systems to Foster Task Performance of the Ageing Workforce,” Designs, vol. 7, no. 1, 2023, Art. no. 23. https://doi.org/10.3390/designs7010023

[9] J. Alves, T. M. Lima, and P. D. Gaspar, “Is Industry 5.0 a Human-Centred Approach? A Systematic Review,” Processes, vol. 11, no. 1, 2023, Art. no. 193. https://doi.org/10.3390/pr11010193

[10] S. M. Araújo, S. B. M. Nery, B. G. Magalhães, K. J. Almeida, and P. D. Gaspar, “Disease Severity Index in Parkinson’s Disease Based on Self-Organizing Maps,” Applied Sciences, vol. 13, no. 18, 2023, Art. no. 10019.

[11] F. Bagherighajari, A. Moradi Bilondi, M. Abdollahzadehsangroudi, A. Hamrang, and J. C. Páscoa, “A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate-blocked interdigitated flow field designs,” Fuel Cells, vol. 23, no. 4, pp. 304-322, 2023.

[12] A. Barros, B. Santos, V. Infante, M. Freitas, B. Fernandes, P. Gamboa, and A. Moura, “Fatigue failure analysis on the 2nd bulkhead beam of the Portuguese Air Force Epsilon TB-30 aircraft,” Engineering Failure Analysis, vol. 151, 2023, Art. no. 107404.

[13] A. Benmoussa and P. V. Gamboa, “Effect of Control Parameters on Hybrid Electric Propulsion UAV Performance for Various Flight Conditions: Parametric Study,” Applied Mechanics, vol. 4, no. 2, pp. 493-513, 2023.

[14] A. Benmoussa and J. C. Páscoa, “Enhancement of a cycloidal self-pitch vertical axis wind turbine performance through DBD plasma actuators at low tip speed ratio,” International Journal of Thermofluids, vol. 17, 2023, Art. no. 100258.

[15] A. Benmoussa, F. F. Rodrigues, and J. C. Páscoa, “Plasma Actuators for Cycloidal Rotor Thrust Vectoring Enhancement in Airships,” Actuators, vol. 12, no. 12, 2023, Art. no. 436.

[16] A. A. Burov, A. D. Guerman, and V. I. Nikonov, “Peaks, notches, and lowlands of comet (67P) Churyumov–Gerasimenko,” Acta Astronautica, vol. 203, pp. 291-295, 2023.

[17] S. Cândido and J. C. Páscoa, “On modal decomposition as surrogate for charge-conservative EHD modelling of Taylor Cone jets,” International Journal of Engineering Science, vol. 193, 2023, Art. no. 103947.

[18] S. Cândido and J. C. Páscoa, “Dynamics of three-dimensional electrohydrodynamic instabilities on Taylor cone jets using a numerical approach,” Physics of Fluids, vol. 35, no. 5, 2023, Art. no. 052110.

[19] D. S. Cardoso, D. Nunes, J. Faria, P. Fael, and P. D. Gaspar, “Intelligent Micro-Cogeneration Systems for Residential Grids: A Sustainable Solution for Efficient Energy Management,” Energies, vol. 16, no. 13, 2023, Art. no. 5215.

[20] A. Corceiro, K. Alibabaei, E. Assunção, P. D. Gaspar, and N. Pereira, “Methods for Detecting and Classifying Weeds, Diseases and Fruits Using AI to Improve the Sustainability of Agricultural Crops: A Review,” Processes, vol. 11, no. 4, 2023, Art. no. 1263.

[21] A. Correia, P. D. Silva, and L. C. Pires, “Energy Requirements and Photovoltaic Area for Atmospheric Water Generation in Different Locations: Lisbon, Pretoria, and Riyadh,” Energies, vol. 16, no. 13, 2023, Art. no. 5201.

[22] G. Costa, L. Santos, J. M. L. P. Caldeira, V. N. G. J. Soares, and P. D. Gaspar, “Performance Assessment of a Wireless Mesh Network for Post-harvest Food Quality Traceability of Fruit Products: A Case Study,” Revista de Informática Teórica e Aplicada, vol. 30, no. 1, pp. 66-77, 2023.

[23] J. Curto, A. Ilangovan, P. D. Gaspar, and P. D. Silva, “Numerical Study of the Applicability of Phase-Change Materials for Fruit-Packing Alveoli,” International Journal of Energy for a Clean Environment, vol. 24, no. 1, pp. 61-79, 2023.

[24] E. H. P. da Silva, S. de Barros, A. F. C. Vieira, R. R. C. da Costa, and M. L. Ribeiro, “Accelerated Aging on the Compression Properties of a Green Polyurethane Foam: Experimental and Numerical Analysis,” Polymers, vol. 15, no. 7, 2023, Art. no. 1784.

[25] D. V. Enrique, G. A. Marodin, F. B. C. Santos, and A. G. Frank, “Implementing industry 4.0 for flexibility, quality, and productivity improvement: technology arrangements for different purposes,” International Journal of Production Research, vol. 61, no. 20, pp. 7001-7026, 2023.

[26] B. Fernandes, P. D. Gaspar, E. Menino, J. M. L. P. Caldeira, and V. N. G. J. Soares, “The Use of Technology in the Diagnosis and Treatment of Epilepsy: Trends and Open Issues,” Revista de Informática Teórica e Aplicada, vol. 30, no. 2, pp. 36-50, 2023.

[27] D. Fernandes, P. D. Gaspar, and P. D. Silva, “Peltier Cell Integration in Packaging Design for Minimizing Energy Consumption and Temperature Variation during Refrigerated Transport,” Designs, vol. 7, no. 4, 2023, Art. no. 88.

[28] C. M. Fernandez, J. Alves, P. D. Gaspar, T. M. Lima, and P. D. Silva, “Innovative processes in smart packaging. A systematic review,” Journal of the Science of Food and Agriculture, vol. 103, no. 3, pp. 986-1003, 2023.

[29] G. Fonseca, J. Nunes-Pereira, and A. P. Silva, “3D Printed Robotic Hand with Piezoresistive Touch Capability,” Applied Sciences, vol. 13, no. 14, 2023, Art. no. 8002.

[30] P. D. Gaspar, J. Alves, A. S. Quelhas, C. Domingos, and S. Caio, “A Chromatic Enzymatic Time-Temperature Integrator Device Based on the Degradation of Phenolic Compounds for the Real-Time Prediction of the Quality and Shelf Life of Cherries,” Foods, vol. 12, no. 6, 2023, Art. no. 1240.

[31] P. Gonçalves, T. Marques, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Road Pavement Damage Detection using Computer Vision Techniques: Approaches, Challenges and Opportunities,” Revista de Informática Teórica e Aplicada, vol. 30, no. 2, pp. 22-35, 2023.

[32] S. Hamdane, L. C. C. Pires, P. D. Silva, and P. D. Gaspar, “Evaluating the Thermal Performance and Environmental Impact of Agricultural Greenhouses Using Earth-to-Air Heat Exchanger: An Experimental Study,” Applied Sciences, vol. 13, no. 2, 2023, Art. no. 1119.

[33] A. Hamrang, M. Abdollahzadeh, A. M. Bilondi, F. Bagherighajari, S. M. Rahgoshay, and J. C. Pascoa, “Comparison of PEMFC performance with parallel serpentine and parallel serpentine-baffled flow fields under various operating and geometrical conditions; a parametric study,” International Journal of Hydrogen Energy, vol. 48, no. 20, pp. 7442-7459, 2023.

[34] D. Ivanov, G. Amaro, Y. Mashtakov, M. Ovchinnikov, and A. Guerman, “Formation Flying Lyapunov-Based Control Using Lorentz Forces,” Aerospace, vol. 10, no. 1, 2023, Art. no. 39.

[35] A. Katunin, D. Wachla, P. Santos, and P. N. B. Reis, “Fatigue life assessment of hybrid bio-composites based on self-heating temperature,” Composite Structures, vol. 304, 2023, Art. no. 116456.

[36] R. Khasare, F. Bagherighajari, F. Dolati, J. Mahmoudimehr, J. Páscoa, and M. Abdollahzadehsangroudi, “The effect of the dielectric barrier discharge plasma actuator in the control of non-reactive flow in a non-premixed bluff body burner,” Physics of Fluids, vol. 35, no. 7, 2023, Art. no. 075135.

[37] R. Khasare, F. Bagherighajari, F. Dolati, J. Mahmoudimehr, J. C. Pascoa, and M. Abdollahzadeh, “Control of the flame and flow characteristics of a non-premixed bluff body burner using dielectric barrier discharge plasma actuators,” Applied Thermal Engineering, vol. 235, 2023, Art. no. 121432.

[38] S. M. Marcelino, P. D. Gaspar, and A. Paço, “Sustainable Waste Management in the Production of Medicinal and Aromatic Plants—A Systematic Review,” Sustainability, vol. 15, no. 18, 2023, Art. no. 13333.

[39] S. M. Marcelino, S. Hamdane, P. D. Gaspar, and A. Paço, “Sustainable Agricultural Practices for the Production of Medicinal and Aromatic Plants: Evidence and Recommendations,” Sustainability, vol. 15, no. 19, 2023, Art. no. 14095.

[40] S. M. Marcelino, T. M. Lima, and P. D. Gaspar, “Lean Laboratory—Designing an Application of Lean for Teaching and Research Laboratories,” Designs, vol. 7, no. 1, 2023, Art. no. 17.

[41] S. Mendes, P. D. Gaspar, F. Charrua-Santos, and H. Navas, “Synergies between Lean and Industry 4.0 for Enhanced Maintenance Management in Sustainable Operations: A Model Proposal,” Processes, vol. 11, no. 9, 2023, Art. no. 2691.

[42] S. Mendes, P. D. Gaspar, F. Charrua-Santos, and H. Navas, “Enhanced Real-Time Maintenance Management Model—A Step toward Industry 4.0 through Lean: Conveyor Belt Operation Case Study,” Electronics, vol. 12, no. 18, 2023, Art. no. 3872.

[43] S. Mendes, P. D. Gaspar, F. Charrua-Santos, and H. Navas, “Integrating TPM and Industry 4.0 to Increase the Availability of Industrial Assets: A Case Study on a Conveyor Belt,” Processes, vol. 11, no. 7, 2023, Art. no. 1956.

[44] S. F. T. Mendes, H. V. G. Navas, and F. M. B. Charrua-Santos, “Improving the performance of a conveyor belt through lean philosophy and Industry 4.0,” Journal of Quality in Maintenance Engineering, 2023.

[45] E. B. Micaelo, L. G. P. S. Lourenço, P. D. Gaspar, J. M. L. P. Caldeira, and V. N. G. J. Soares, “Bird Deterrent Solutions for Crop Protection: Approaches, Challenges, and Opportunities,” Agriculture, vol. 13, no. 4, 2023, Art. no. 774.

[46] A. Mohammadi, F. Dolati, F. Hassani, J. C. Páscoa, and M. Abdollahzadehsangroudi, “Numerical analysis and optimization of heat transfer enhancement on a flat plate by an EHD jet,” International Journal of Heat and Mass Transfer, vol. 217, 2023, Art. no. 124707.

[47] M. Moreira, F. Rodrigues, S. Cândido, G. Santos, and J. Páscoa, “Development of a Background-Oriented Schlieren (BOS) System for Thermal Characterization of Flow Induced by Plasma Actuators,” Energies, vol. 16, no. 1, 2023, Art. no. 540.

[48] E. Nanga, J. Curto, P. D. Gaspar, P. D. Silva, and J. M. S. Cruz, “Numerical Parametric Study of the Influence of Fruit Packaging Boxes Arrangement on Fluid Flow and Heat Transfer,” International Journal of Energy for a Clean Environment, vol. 24, no. 1, pp. 45-59, 2023.

[49] D. Nascimento, I. Martins, T. A. Dutra, and L. Moreira, “Computer Vision Based Quality Control for Additive Manufacturing Parts,” International Journal of Advanced Manufacturing Technology, vol. 124, no. 10, pp. 3241-3256, 2023.

[50] J. Oliveira, J. Pereira, E. Santos, T. M. Lima, and P. D. Gaspar, “Optimization of the COVID-19 Vaccine Distribution Route Using the Vehicle Routing Problem with Time Windows Model and Capacity Constraint,” Applied System Innovation, vol. 6, no. 1, 2023, Art. no. 17.

[51] P. Pakpahan, L. Moreira, A. Camelo, D. Karya, A. C. Martins, P. D. Gaspar, and C. E. Santo, “Evaluation of comparative scenarios from different sites of chestnut production using life cycle assessment: Case study in the Beira Interior region of Portugal,” Heliyon, vol. 9, no. 1, 2023, Art. no. e12847.

[52] M. R. Pendar, S. Cândido, and J. C. Páscoa, “Optimization of painting efficiency applying unique techniques of high-voltage conductors and nitrotherm spray: Developing deep learning models using computational fluid dynamics dataset,” Physics of Fluids, vol. 35, no. 7, 2023, Art. no. 075119.

[53] A. Pereira, J. C. C. Leitão, P. D. Gaspar, C. Fael, I. Falorca, W. Khairy, N. Wahid, H. El Yousfi, B. Bouazzama, J. Siering, H. Hansmann, J. Zascerinska, S. Camilleri, F. Busuttil, M. Borg, J. Mizzi, R. Micallef, and J. Cutajar, “Exploring Irrigation and Water Supply Technologies for Smallholder Farmers in the Mediterranean Region,” Sustainability, vol. 15, no. 8, 2023, Art. no. 6875.

[54] J. Pinelo, A. D. Rocha, M. Arvana, J. Gonçalves, N. Cota, and P. Silva, “Unveiling LoRa’s Oceanic Reach: Assessing the Coverage of the Azores LoRaWAN Network from an Island,” Sensors, vol. 23, no. 17, 2023, Art. no. 7394.

[55] G. Rocha, A. D. Paço, H. Alves, and P. D. Gaspar, “The Portuguese Circular Entrepreneurial Ecosystem: Experts Advice on How to Overcome the Challenges,” Sustainability, vol. 15, no. 5, 2023, Art. no. 4642.

[56] F. Rodrigues, M. Abdollahzadehsangroudi, J. Nunes-Pereira, and J. Páscoa, “Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation,” Actuators, vol. 12, no. 1, 2023, Art. no. 5.

[57] A. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Eco-Efficiency in Mushroom Production: A Study on HVAC Equipment to Reduce Energy Consumption and CO2 Emissions,” Applied Sciences, vol. 13, no. 10, 2023, Art. no. 6129.

[58] A. F. Santos, P. D. Gaspar, H. J. L. de Souza, J. M. L. P. Caldeira, and V. N. G. J. Soares, “An Eco-Energetic Performance Comparison of Dehumidification Systems in High-Moisture Indoor Environments,” Applied Sciences, vol. 13, no. 11, 2023, Art. no. 6824.

[59] F. Santos, M. Dieste, G. Orzes, and F. Charrua-Santos, “Resources and capabilities for Industry 4.0 implementation: evidence from proactive Portuguese SMEs,” Journal of Manufacturing Technology Management, vol. 34, no. 1, pp. 25-43, 2023.

[60] P. Santos, T. M. Lima, and P. D. Gaspar, “Optimization of the Production Management of an Upholstery Manufacturing Process Using Lean Tools: A Case Study,” Applied Sciences, vol. 13, no. 17, 2023, Art. no. 9974.

[61] P. Santos, A. P. Silva, and P. N. B. Reis, “Effect of Carbon Nanofibers on the Strain Rate and Interlaminar Shear Strength of Carbon/Epoxy Composites,” Materials, vol. 16, no. 12, 2023, Art. no. 4332.

[62] P. Santos, A. P. Silva, and P. N. B. Reis, “Effect of Carbon Nanofibers on the Viscoelastic Response of Epoxy Resins,” Polymers, vol. 15, no. 4, 2023, Art. no. 821.

[63] P. Santos, A. P. Silva, and P. N. B. Reis, “Effect of carbon nanofibers on the viscoelastic response of carbon/epoxy composites,” Journal of Reinforced Plastics and Composites, 2023.

[64] K. O. Shvydyuk, J. Nunes-Pereira, F. F. Rodrigues, and A. P. Silva, “Review of Ceramic Composites in Aeronautics and Aerospace: A Multifunctional Approach for TPS, TBC and DBD Applications,” Ceramics, vol. 6, no. 1, pp. 195-230, 2023.

[65] K. O. Shvydyuk, F. F. Rodrigues, J. Nunes-Pereira, J. C. Páscoa, S. Lanceros-Mendez, and A. P. Silva, “Long-lasting ceramic composites for surface dielectric barrier discharge plasma actuators,” Journal of the European Ceramic Society, vol. 43, no. 14, pp. 6112-6121, 2023.

[66] B. Szczucka-Lasota, T. Węgrzyn, A. P. Silva, and A. Jurek, “AHSS—Construction Material Used in Smart Cities,” Smart Cities, vol. 6, no. 2, pp. 1132-1151, 2023.

[67] O. Teixeira and J. Páscoa, “Catalytic wall effects for hypersonic nozzle flow in thermochemical non-equilibrium,” Acta Astronautica, vol. 203, pp. 48-59, 2023.

[68] M. Trancossi, J. Pascoa, and T. Catellani, “Exergy, Ecology, and Democracy—Concepts of a Vital Society or a Proposal for an Exergy Tax 30 Years After, Part 2: Exergy and UN Sustainable Development Goals,” Thermal Science, vol. 27, no. 3, pp. 2359-2375, 2023.

[69] M. Trancossi, J. Pascoa, and T. Catellani, “Exergy, Ecology, and Democracy—Concepts of a Vital Society or a Proposal for an Exergy Tax 30 Years After, Part 1: Generalities,” Thermal Science, vol. 27, no. 2, pp. 1337-1353, 2023.

[70] A. F. C. Vieira, E. H. P. da Silva, and M. L. Ribeiro, “Numerical Approach to Simulate the Mechanical Behavior of Biodegradable Polymers during Erosion,” Polymers, vol. 15, no. 9, 2023, Art. no. 1979.

[71] J. C. Vieira, A. C. Vieira, M. L. Ribeiro, P. T. Fiadeiro, and A. P. Costa, “Angle of the Perforation Line to Optimize Partitioning Efficiency on Toilet Papers,” Eng, vol. 4, no. 1, pp. 80-91, 2023.

[72] M. A. Moura, M. M. Mendes, T. M. Lima, P. D. Gaspar, and S. Fidalgo, “Decision Support Tool in Health Units,” Brazilian Journal of Business, vol. 5, no. 2, pp. 1367-1375, 2023. https://doi.org/10.34140/bjbv5n2-040

[73] A. F. Santos, P. D. Gaspar, G. Lira, and H. J. L. Souza, “Innovative hybrid geothermal/air heat system for biogas production,” Journal of Engineering Research, vol. 3, no. 27, pp. 1-12, 2023. https://doi.org/10.22533/at.ed.3173272314081

[74] L. G. P. S. Lourenço, E. B. Micaelo, P. D. Gaspar, J. M. L. P. Caldeira, and V. N. G. J. Soares, “Protótipo de solução de deteção e dispersão de aves para proteção de colheitas,” Revista de Sistemas e Computação, vol. 13, no. 3, pp. 34-42, 2023. https://doi.org/10.36558/rsc.v13i3.8490

[75] J. Videira, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Detecting and monitoring the development stages of wild flowers and plants using computer vision: Approaches, challenges and opportunities,” International Journal of Advances in Intelligent Informatics, vol. 9, no. 3, pp. 347-362, 2023. https://doi.org/10.26555/ijain.v9i3.1012

[76] J. Capucho, A. Paço, and P. D. Gaspar, “Tourism related to aromatic and medicinal plants: Some practical evidence,” Sustainability, vol. 15, no. 22, 2023, Art. no. 15966. https://doi.org/10.3390/su152215966

[77] R. Antunes, M. L. Aguiar, and P. D. Gaspar, “A dynamic STEM-driven approach through mobile robotics to enhance critical thinking and interdisciplinary skills for empowering Industry 4.0,” Technologies, vol. 11, no. 6, 2023, Art. no. 170. https://doi.org/10.3390/technologies11060170

[78] H. Gomes, F. Navio, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Radio-frequency identification traceability system implementation in the packaging section of an industrial company,” Applied Sciences, vol. 13, no. 23, 2023, Art. no. 12943. https://doi.org/10.3390/app132312943

[1] M. L. Aguiar, P. D. Gaspar, and P. D. Silva, “Phase change materials in packaging for buffering temperature fluctuation during short-range distribution of perishable food products,” The 26th IIR International Congress of Refrigeration, ICR 2023, vol. 3, pp. 634-644, Paris, France, August 21-25, 2023. https://doi.org/10.18462/iir.icr.2023.0400

[2] M. L. Aguiar, P. D. Gaspar, and P. D. Silva, “Analysis of the frost formation pattern in heat exchangers for proper placement of frost measuring sensors,” The 26th IIR International Congress of Refrigeration, ICR 2023, vol. 2, pp. 323-333, Paris, France, August 21-25, 2023. https://doi.org/10.18462/iir.icr.2023.0399

[3] Adam Döring, Bożena Szczucka-Lasota, Tomasz Węgrzyn, Romana Antczak-Jarząbska, and Abílio Pereira Silva, “Regeneration of car alternators by soldering methods,” Conference on Transport Problems 2023, Faculty of Transport and Aviation Engineering, Katowice, June 19-23, 2023.

[4] Bożena Szczucka-Lasota, Tomasz Węgrzyn, Bogusław Łazarz, Krzysztof Lukaszkowicz, Klaudiusz Gołombek, Abílio Pereira Silva, and Krzysztof Ireneusz Wilczyński, “Welding of high-resistance steel in the construction of electric transport,” Conference on Transport Problems 2023, Faculty of Transport and Aviation Engineering, Katowice, June 19-23, 2023.

[5] Frederico Rodrigues, Kateryna Shvydyuk, J. Nunes-Pereira, J. Páscoa, and A. P. Silva, “Plasma actuators based on alumina ceramics for active flow control applications,” AJKFluids 2023, ASME–JSME–KSME Fluids Engineering Division, Osaka, Japan, July 9-13, 2023.

[6] Kateryna Shvydyuk, J. Nunes-Pereira, F. Rodrigues, J. Páscoa, S. Lanceros-Mendez, and A. P. Silva, “Multifunctional Ceramics for Aeronautical and Aerospace Applications,” Materiais 2023, Guimarães, Portugal, April 3-6, 2023.

[7] J. Nunes-Pereira, F. F. Rodrigues, M. Abdollahzadeh, P. Santos, M. P. Silva, A. P. Silva, J. C. Pascoa, and S. Lanceros-Mendez, “Dielectric barrier discharge plasma actuators based on thermosetting composites for flow control in wind turbines blades,” Materiais 2023, Guimarães, Portugal, April 3-6, 2023.

[8] João Parente, A. Carvalho, J. Nunes-Pereira, P. N. B. Reis, and A. P. Silva, “CFRP laminates enhanced with graphene nanoparticles in multifunctional applications,” Materiais 2023, Guimarães, Portugal, April 3-6, 2023.

[9] Gonçalo Fonseca, J. Nunes-Pereira, and A. P. Silva, “Attribution of somatosensory properties to an upper limb prosthesis,” Materiais 2023, Guimarães, Portugal, April 3-6, 2023.

[10] A. F. Santos, P. D. Gaspar, H. J. L. Souza, and G. Lira, “Innovative hybrid geothermal/air heat system for biogas production,” Work in Progress and Innovations – Book of Abstracts, The 26th IIR International Congress of Refrigeration, ICR 2023, Paris, France, August 21-25, 2023. https://doi.org/10.18462/iir.icr.2023.0971

[11] A. F. Santos, P. D. Gaspar, and H. J. L. Souza, “Eco-energetic comparison of dehumidification systems for indoor swimming pools: refrigeration system vs. desiccant wheel using the TEWI metric,” Work in Progress and Innovations – Book of Abstracts, The 26th IIR International Congress of Refrigeration, ICR 2023, pp. 14-24, Paris, France, August 21-25, 2023. https://doi.org/10.18462/iir.icr.2023.0971

[12] D. Ivanov, R. Gondar, U. Monakhova, and A. Guerman, “Control of Femtosatellites Swarm Using Magnetorquers,” AIP Conference Proceedings, vol. 2549, 2023.

[13] J. M. Parente, A. P. Silva, and P. N. B. Reis, “Impact of Cure Temperature and Suspension Viscosity on the Mechanical Properties of Carbon Nanofiber-Reinforced Epoxy Resin Nanocomposites,” 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, IWPDF 2023, Istanbul, Turkey, October 4-6, 2023.

[14] J. M. Parente and P. N. B. Reis, “Fatigue behaviour of 3D printed auxetic materials: An overview,” Third European Conference on the Structural Integrity of Additively Manufactured Materials, Porto, Portugal, September 4-6, 2023.

[15] T. Węgrzyn, B. Szczucka-Lasota, A. P. Silva, W. Tarasiuk, R. A. Jarząbska, and A. Döring, “MAG Welding of austenite steel for the structure of antenna mounts and supports,” 2023 22nd International Symposium INFOTEH-JAHORINA, INFOTEH 2023, 2023.

[16] Diogo Loureiro Martinho, Torsten Berning, Mohammadmahdi Abdollahzadehsangroudi, Anders Rønne Rasmussen, Jakob Hærvig, and Samuel Simon Araya, “A Three-Dimensional, Multiphysics Model of an Alkaline Electrolyzer,” ECS Transactions, vol. 112, no. 4, 2023.

[1] A. Freitas, T. M. Lima, and P. D. Gaspar, “A Fuzzy Logic-Based Selection Approach to Select Suitable Industry 4.0 Tools for Ergonomic Risk Mitigation: Application to the Portuguese Wine Sector,” in Studies in Systems, Decision and Control, vol. 449, 2023, pp. 179-197.

[2] J. Alves, T. M. Lima, and P. D. Gaspar, “Indústria 5.0 — Priorização da centralidade humana para a sustentabilidade e resiliência na produção industrial,” in Indústria 5.0 – Pessoas, Tecnologia e Sustentabilidade, C. Machado and J. P. Davim, Eds., Chapter 7, pp. 177-205, Actual Editora – Edições Almedina, Coimbra, Portugal, October 2023. ISBN: 978-989-6947-59-0.

[3] Tomasz Wegrzyn, Bozena Szczucka-Lasota, and Abílio Silva, “MAG Welding of High-Strength Civil Constructions,” in Proceedings of CIRMARE 2023: Recovery, Maintenance and Rehabilitation of Buildings, Lecture Notes in Civil Engineering, Springer, 2023. https://doi.org/10.1007/978-3-031-48461-2

[1] A. Freitas, T. M. Lima, and P. D. Gaspar, “Ergonomic Risk Minimization in the Portuguese Wine Industry: A Task Scheduling Optimization Method Based on the Ant Colony Optimization Algorithm,” Processes, vol. 10, no. 7, 2022, Art. no. 1364.

[2] A. Freitas, T. M. Lima, and P. D. Gaspar, “Meta-Heuristic Model for Optimization of Production Layouts Based on Occupational Risk Assessment: Application to the Portuguese Wine Sector,” Applied System Innovation, vol. 5, no. 2, 2022, Art. no. 40.

[3] A. Chouchene, A. Ventura Carvalho, F. Charrua-Santos, and W. Barhoumi, “Augmented Reality-Based Framework Supporting Visual Inspection for Automotive Industry,” Applied System Innovation, vol. 5, no. 3, 2022, Art. no. 48.

[4] A. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Evaluating the Energy Efficiency and Environmental Impact of COVID-19 Vaccines Coolers through New Optimization Indexes: Comparison between Refrigeration Systems Using HFC or Natural Refrigerants,” Processes, vol. 10, no. 4, 2022, Art. no. 790.

[5] A. Ilangovan, S. Hamdane, P. D. Silva, P. D. Gaspar, and L. Pires, “Promising and Potential Applications of Phase Change Materials in the Cold Chain: A Systematic Review,” Energies, vol. 15, no. 20, 2022, Art. no. 7683.

[6] A. Moradi Bilondi, F. Bagherighajari, M. Abdollahzadehsangroudi, M. J. Kermani, and J. C. Páscoa, “The Role of Porous Carbon Inserts on the Performance of Polymer Electrolyte Membrane Fuel Cells: A Parametric Numerical Study,” Energy Technology, vol. 10, no. 12, 2022, Art. no. 2200966.

[7] P. Proença, P. D. Gaspar, and T. M. Lima, “Lean Optimization Techniques for Improvement of Production Flows and Logistics Management: The Case Study of a Fruits Distribution Center,” Processes, vol. 10, no. 7, 2022, Art. no. 1384.

[8] A. P. Silva, T. Węgrzyn, T. Szymczak, B. Szczucka-Lasota, and B. Łazarz, “Hardox 450 Weld in Microstructural and Mechanical Approaches after Welding at MicroJet Cooling,” Materials, vol. 15, no. 20, 2022, Art. no. 7118.

[9] V. Carvalho and T. M. Lima, “Quality 4.0 and Cognitive Engineering Applied to Quality Management Systems: A Framework,” Applied System Innovation, vol. 5, no. 6, 2022, Art. no. 115.

[10] B. Magalhães, P. D. Gaspar, A. Corceiro, L. João, and C. Bumba, “Fuzzy Logic Decision Support System to Predict Peaches Marketable Period at Highest Quality,” Climate, vol. 10, no. 3, 2022, Art. no. 29.

[11] G. Rodrigues, P. D. Gaspar, M. P. Simões, P. D. Silva, and L. P. Andrade, “Review on techniques and treatments toward the mitigation of the chilling injury of peaches,” Journal of Food Processing and Preservation, vol. 46, no. 8, 2022, Art. no. e14358.

[12] D. F. Macedo, A. F. Cunha, J. F. Mano, M. B. Oliveira, and A. P. Silva, “Tricalcium phosphate doped with Mg2+ and combinations of Mn2+, Zn2+ and Fe3+: A DoE study on sintering, mechanical, microstructural and biological properties,” Ceramics International, vol. 48, no. 14, pp. 20467-20477, 2022.

[13] D. Ivanov, R. Gondar, U. Monakhova, A. Guerman, and M. Ovchinnikov, “Electromagnetic uncoordinated control of a ChipSats swarm using magnetorquers,” Acta Astronautica, vol. 192, pp. 15-29, 2022.

[14] A. Morais, P. D. Gaspar, P. D. Silva, L. P. Andrade, and J. Nunes, “Energy consumption and efficiency measures in the Portuguese food processing industry,” Journal of Food Processing and Preservation, vol. 46, no. 8, 2022, Art. no. e14862.

[15] D. S. Cardoso and P. O. Fael, “8-stroke low heat rejection engine,” Energy Reports, vol. 8, pp. 462-467, 2022.

[16] D. V. Enrique, É. Marcon, F. Charrua-Santos, and A. G. Frank, “Industry 4.0 enabling manufacturing flexibility: technology contributions to individual resource and shop floor flexibility,” Journal of Manufacturing Technology Management, vol. 33, no. 5, pp. 853-875, 2022.

[17] J. Ananias and P. D. Gaspar, “A Low-Cost Collaborative Robot for Science and Education Purposes to Foster the Industry 4.0 Implementation,” Applied System Innovation, vol. 5, no. 4, 2022, Art. no. 72.

[18] E. Assunção, P. D. Gaspar, K. Alibabaei, M. P. Simões, H. Proença, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Real-Time Image Detection for Edge Devices: A Peach Fruit Detection Application,” Future Internet, vol. 14, no. 11, 2022, Art. no. 323.

[19] E. Assunção, P. D. Gaspar, R. Mesquita, M. P. Simões, K. Alibabaei, A. Veiros, and H. Proença, “Real-Time Weed Control Application Using a Jetson Nano Edge Device and a Spray Mechanism,” Remote Sensing, vol. 14, no. 17, 2022, Art. no. 4217.

[20] E. T. Assunção, P. D. Gaspar, R. J. M. Mesquita, M. P. Simões, A. Ramos, H. Proença, and P. R. M. Inácio, “Peaches Detection Using a Deep Learning Technique—A Contribution to Yield Estimation, Resources Management, and Circular Economy,” Climate, vol. 10, no. 2, 2022, Art. no. 11.

[21] D. V. Enrique, L. V. Lerman, P. R. D. Sousa, G. B. Benitez, F. M. Bigares Charrua Santos, and A. G. Frank, “Being digital and flexible to navigate the storm: How digital transformation enhances supply chain flexibility in turbulent environments,” International Journal of Production Economics, vol. 250, 2022. https://doi.org/10.1016/j.ijpe.2022.108668

[22] D. V. Enrique, G. A. Marodin, F. B. C. Santos, and A. G. Frank, “Implementing industry 4.0 for flexibility, quality, and productivity improvement: Technology arrangements for different purposes,” International Journal of Production Research, 2022. https://doi.org/10.1080/00207543.2022.2142689

[23] F. Bagherighajari, A. Ramiar, M. Abdollahzadehsangroudi, J. C. Páscoa, and P. J. Oliveira, “Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields,” International Journal of Energy Research, vol. 46, no. 11, pp. 15309-15331, 2022.

[24] F. Bagherighajari, M. Abdollahzadehsangroudi, M. Esmaeilpour, F. Dolati, and J. Páscoa, “Novel converging-diverging microchannel heat sink with porous fins for combined thermo-hydraulic performance,” Physics of Fluids, vol. 34, no. 11, 2022, Art. no. 0118700.

[25] A. C. Saconi, A. C. Vieira, and M. L. Ribeiro, “Experimental Characterization and Numerical Modeling of the Corrosion Effect on the Mechanical Properties of the Biodegradable Magnesium Alloy WE43 for Orthopedic Applications,” Materials, vol. 15, no. 20, 2022, Art. no. 7164.

[26] A. C. Saconi, A. C. Vieira, and M. L. Ribeiro, “Experimental Characterization and Numerical Modeling of the Corrosion Effect on the Mechanical Properties of the Biodegradable Magnesium Alloy WE43 for Orthopedic Applications,” Materials Proceedings, vol. 8, no. 1, 2022, Art. no. 16.

[27] A. Jesus, M. L. Aguiar, and P. D. Gaspar, “Computational Tool to Support the Decision in the Selection of Alternative and/or Sustainable Refrigerants,” Energies, vol. 15, no. 22, 2022, Art. no. 8497.

[28] A. Hamrang, M. Abdollahzadeh, M. J. Kermani, and S. M. Rahgoshay, “Numerical simulation of the PEM fuel cell performance enhancement by various blockage arrangement of the cathode serpentine gas flow channel outlets/inlets,” International Journal of Heat and Mass Transfer, vol. 186, 2022.

[29] J. Alves, T. M. Lima, and P. D. Gaspar, “The sociodemographic challenge in human-centred production systems–a systematic literature review,” Theoretical Issues in Ergonomics Science, 2022.

[30] J. C. Vieira, A. C. Vieira, A. de O. Mendes, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Toilet Paper Perforation Efficiency,” BioResources, vol. 17, no. 1, pp. 492-503, 2022.

[31] J. C. Vieira, A. de O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Embossing Pressure Effect on Mechanical and Softness Properties of Industrial Base Tissue Papers with Finite Element Method Validation,” Materials Proceedings, vol. 8, 2022.

[32] J. C. Vieira, A. de O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Embossing Pressure Effect on Mechanical and Softness Properties of Industrial Base Tissue Papers with Finite Element Method Validation,” Materials Proceedings, vol. 8, no. 1, 2022, Art. no. 52.

[33] J. C. Vieira, A. O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Embossing Pressure Effect on Mechanical and Softness Properties of Industrial Base Tissue Papers with Finite Element Method Validation,” Materials, vol. 15, no. 12, 2022, Art. no. 4324.

[34] J. C. Vieira, A. O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “FEM Analysis Validation of Rubber Hardness Impact on Mechanical and Softness Properties of Embossed Industrial Base Tissue Papers,” Polymers, vol. 14, no. 12, 2022, Art. no. 2485.

[35] J. C. Vieira, A. O. Mendes, M. L. Ribeiro, A. C. Vieira, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Embossing Lines and Dots Geometry Effect on the Key Tissue Paper Properties with Finite Element Method Analysis,” Polymers, vol. 14, no. 17, 2022, Art. no. 3448.

[36] J. Lemos, P. D. Gaspar, and T. M. Lima, “Environmental Risk Assessment and Management in Industry 4.0: A Review of Technologies and Trends,” Machines, vol. 10, no. 8, 2022, Art. no. 702.

[37] J. Lemos, P. D. Gaspar, and T. M. Lima, “Individual Environmental Risk Assessment and Management in Industry 4.0: An IoT-Based Model,” Applied System Innovation, vol. 5, no. 5, 2022, Art. no. 88.

[38] A. Mamede, D. F. Macedo, A. Maceiras, and A. P. Silva, “Reinforcement of the Ceramic Matrix of CaO-ZrO2-MgO with Al2O3 Coarse Particles,” Ceramics, vol. 5, no. 1, pp. 148-160, 2022.

[39] J. Nunes-Pereira, F. F. Rodrigues, M. Abdollahzadehsangroudi, J. C. Páscoa, and S. Lanceros-Mendez, “Improved performance of polyimide Cirlex-based dielectric barrier discharge plasma actuators for flow control,” Polymers for Advanced Technologies, vol. 33, no. 4, pp. 1278-1290, 2022.

[40] P. L. Ribeiro, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Computational Simulation of an Agricultural Robotic Rover for Weed Control and Fallen Fruit Collection—Algorithms for Image Detection and Recognition and Systems Control, Regulation, and Command,” Electronics, vol. 11, no. 5, 2022, Art. no. 790.

[41] M. Rebelo, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “A Novel mHealth Approach for the Monitoring and Assisted Therapeutics of Obstructive Sleep Apnea,” Applied Sciences, vol. 12, no. 20, 2022, Art. no. 10257.

[42] K. Alibabaei, E. Assunção, P. D. Gaspar, J. M. L. P. Caldeira, and V. N. G. J. Soares, “Real-Time Detection of Vine Trunk for Robot Localization Using Deep Learning Models Developed for Edge TPU Devices,” Future Internet, vol. 14, no. 7, 2022, Art. no. 199.

[43] K. Alibabaei, P. D. Gaspar, E. Assunção, S. Alirezazadeh, and T. M. Lima, “Irrigation optimization with a deep reinforcement learning model: Case study on a site in Portugal,” Agricultural Water Management, vol. 263, 2022, Art. no. 107480.

[44] K. Alibabaei, P. D. Gaspar, E. Assunção, S. Alirezazadeh, T. M. Lima, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Comparison of On-Policy Deep Reinforcement Learning A2C with Off-Policy DQN in Irrigation Optimization: A Case Study at a Site in Portugal,” Computers, vol. 11, no. 7, 2022, Art. no. 104.

[45] K. Alibabaei, P. D. Gaspar, T. M. Lima, R. M. Campos, I. Girão, J. Monteiro, and C. M. Lopes, “A Review of the Challenges of Using Deep Learning Algorithms to Support Decision-Making in Agricultural Activities,” Remote Sensing, vol. 14, no. 3, 2022, Art. no. 638.

[46] L. Pinto de Andrade, A. Veloso, C. Espírito Santo, P. Dinis Gaspar, P. D. Silva, M. Resende, H. Beato, C. Baptista, C. M. Pintado, L. Paulo, and M. P. Simões, “Effect of Controlled Atmospheres and Environmental Conditions on the Physicochemical and Sensory Characteristics of Sweet Cherry Cultivar Satin,” Agronomy, vol. 12, no. 1, 2022, Art. no. 188.

[47] M. Abdollahzadeh, F. Rodrigues, J. Nunes-Pereira, J. C. Pascoa, and L. Pires, “Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application,” Sensors and Actuators A: Physical, vol. 335, 2022, Art. no. 113391.

[48] M. L. Aguiar, P. D. Gaspar, and P. D. da Silva, “Image recognition method for frost sensing applications,” Energy Reports, vol. 8, pp. 234-240, 2022.

[49] S. Davoodi, K. Zografos, P. J. Oliveira, and R. J. Poole, “On the similarities between the simplified Phan-Thien-Tanner model and the finitely extensible nonlinear elastic dumbbell (Peterlin closure) model in simple and complex flows,” Physics of Fluids, vol. 34, no. 3, 2022, Art. no. 033110.

[50] M. Gough, S. F. Santos, A. Almeida, M. Lotfi, M. S. Javadi, D. Z. Fitiwi, G. J. Osorio, R. Castro, and J. P. S. Catalao, “Blockchain-Based Transactive Energy Framework for Connected Virtual Power Plants,” IEEE Transactions on Industry Applications, vol. 58, no. 1, pp. 986-995, 2022.

[51] M. Gough, S. F. Santos, M. Lotfi, M. S. Javadi, G. J. Osorio, P. Ashraf, R. Castro, and J. P. S. Catalao, “Operation of a Technical Virtual Power Plant Considering Diverse Distributed Energy Resources,” IEEE Transactions on Industry Applications, vol. 58, no. 2, pp. 2547-2558, 2022.

[52] M. L. Aguiar, P. D. Gaspar, P. D. Silva, L. C. Domingues, and D. M. Silva, “Real-Time Temperature and Humidity Measurements during the Short-Range Distribution of Perishable Food Products as a Tool for Supply-Chain Energy Improvements,” Processes, vol. 10, no. 11, 2022, Art. no. 2286.

[53] M. L. Lourenço, R. A. Pitarma, and D. A. Coelho, “A Design Contribution to Ergonomic PC Mice Development,” International Journal of Environmental Research and Public Health, vol. 19, no. 13, 2022, Art. no. 8126.

[54] M. Lotfi, G. J. Osório, M. S. Javadi, M. S. El Moursi, C. Monteiro, and J. P. S. Catalão, “A fully decentralized machine learning algorithm for optimal power flow with cooperative information exchange,” International Journal of Electrical Power and Energy Systems, vol. 139, 2022, Art. no. 107990.

[55] M. Lotfi, T. Almeida, M. S. Javadi, G. J. Osório, C. Monteiro, and J. P. S. Catalão, “Coordinating energy management systems in smart cities with electric vehicles,” Applied Energy, vol. 307, 2022, Art. no. 118241.

[56] M. R. Pendar and J. C. Páscoa, “Numerical Investigation of Plasma Actuator Effects on Flow Control Over a Three-Dimensional Airfoil With a Sinusoidal Leading Edge,” Journal of Fluids Engineering, Transactions of the ASME, vol. 144, no. 8, 2022, Art. no. 081208.

[57] M. R. Pendar, F. Rodrigues, J. C. Páscoa, and R. Lima, “Review of coating and curing processes: Evaluation in automotive industry,” Physics of Fluids, vol. 34, no. 10, 2022, Art. no. 101301.

[58] M. Trancossi, J. C. Pascoa, and S. Sharma, “Response to Comment on: A Critical Review on Heat and Mass Transfer Modelling of Viral Infection and Virion Evolution the Case of SARS-COV2,” Thermal Science, vol. 26, no. 2, pp. 1219-1228, 2022.

[59] Y. Ovchinnikov, A. D. Guerman, Y. V. Mashtakov, and D. S. Roldugin, “Mathematical Modeling of the Dynamics of a Low-Flying Spacecraft with a Ramjet Electric Propulsion Engine,” Mathematical Models and Computer Simulations, vol. 14, no. 3, pp. 452-465, 2022.

[60] F. D. Silva, J. M. N. da Silva, L. K. D. Silva, T. D. F. M. Lima, A. C. Bornia, L. A. H. D. Souza, W. K. D. S. Leite, and E. M. D. A. Vieira, “Do men and women have different musculoskeletal symptoms at the same musculoskeletal discomfort level?,” Ergonomics, vol. 65, no. 11, pp. 1486-1508, 2022.

[61] P. D. Gaspar, V. N. G. J. Soares, J. M. L. P. Caldeira, L. P. Andrade, and C. D. Soares, “Technological modernization and innovation of traditional agri-food companies based on ICT solutions—The Portuguese case study,” Journal of Food Processing and Preservation, vol. 46, no. 8, 2022, Art. no. e14271.

[62] R. Mesquita and P. D. Gaspar, “A Novel Path Planning Optimization Algorithm Based on Particle Swarm Optimization for UAVs for Bird Monitoring and Repelling,” Processes, vol. 10, no. 1, 2022, Art. no. 62.

[63] M. J. Jalali, G. J. Osorio, S. Ahmadian, M. Lotfi, V. M. A. Campos, M. Shafie-Khah, A. Khosravi, and J. P. S. Catalao, “New Hybrid Deep Neural Architectural Search-Based Ensemble Reinforcement Learning Strategy for Wind Power Forecasting,” IEEE Transactions on Industry Applications, vol. 58, no. 1, pp. 15-27, 2022.

[64] M. J. Jalali, P. Arora, B. K. Panigrahi, A. Khosravi, S. Nahavandi, G. J. Osório, and J. P. S. Catalão, “An advanced deep neuroevolution model for probabilistic load forecasting,” Electric Power Systems Research, vol. 211, 2022, Art. no. 108351.

[65] S. Valvez, A. P. Silva, and P. N. B. Reis, “Compressive Behaviour of 3D-Printed PETG Composites,” Aerospace, vol. 9, no. 3, 2022, Art. no. 124.

[66] S. Valvez, A. P. Silva, and P. N. B. Reis, “Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts,” Polymers, vol. 14, no. 13, 2022, Art. no. 2564.

[67] T. Devezas and L. C. M. Miranda, “On the global time evolution of the Covid-19 pandemic: Logistic modeling,” Technological Forecasting and Social Change, vol. 175, 2022, Art. no. 121387.

[68] T. M. Lima and D. A. Coelho, “Gender differences in associating musculoskeletal complaints, housework, electronic device usage and physical exercise for administrative workers,” International Journal of Occupational Safety and Ergonomics, vol. 28, no. 2, pp. 1189-1197, 2022.

[69] H. Zhen, G. Qiu, S. Mei, F. Wang, X. Zhang, R. Yin, Y. Li, G. J. Osório, M. Shafie-Khah, and J. P. S. Catalão, “An ultra-short-term wind speed forecasting model based on time scale recognition and dynamic adaptive modeling,” International Journal of Electrical Power and Energy Systems, vol. 135, 2022, Art. no. 107502.

[1] M. Nezhad, P. H. J. Nardelli, F. Ghanavati, S. Sahoo, and G. J. Osorio, “Mixed-Integer Linear Programming based Maintenance Scheduling of Generating Units,” 2022 IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I&CPS Europe 2022, 2022.

[2] M. Nezhad, P. H. J. Nardelli, S. Sahoo, F. Ghanavati, and G. J. Osorio, “A Centralized Home Energy Management System to Minimize Consumer’s Electricity Bill,” 2022 IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I&CPS Europe 2022, 2022.

[3] A. Ilangovan, P. D. Gaspar, P. D. Silva, A. R. Gonçalves, A. M. Sampaio, A. J. Pontes, and N. Alves, “CFD parametric study of thermal performance of different fruit packaging box designs,” AIP Conference Proceedings, vol. 2425, 2022.

[4] A. Nunes and F. Brójo, “Experimental Study of a Novel 4 Stroke Spark Ignition Geared-Hypocycloid Engine,” Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition, IMECE 2022, Columbus, Ohio, United States, October 30-November 3, 2022.

[5] D. Fernandes, P. D. Silva, L. C. Pires, and P. D. Gaspar, “Adjusting the Operating Conditions of a Refrigeration System in Order to Reduce the Frost Growth on Heat Exchange Surfaces,” AIP Conference Proceedings, vol. 2425, 2022.

[6] A. Marto and F. Brójo, “Hybrid-Electric Propulsion Solutions for UAV Application,” Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition, IMECE 2022, Columbus, Ohio, United States, October 30-November 3, 2022.

[7] F. Rodrigues, M. Abdollahzadeh, F. Bagherighajari, and J. Pascoa, “Numerical simulation of anti-icing effect with dielectric barrier discharge plasma actuators on a surface of an airfoil,” American Society of Mechanical Engineers, Fluids Engineering Division, vol. 1, 2022.

[8] J. M. Parente, R. Simões, and P. N. B. Reis, “Effect of graphene nanoparticles on suspension viscosity and mechanical properties of epoxy-based nanocomposites,” Procedia Structural Integrity, vol. 37, pp. 820-825, 2022.

[9] J. Magalhães and F. Brójo, “Design of a Single Expansion Ramp Nozzle and Numerical Investigation of Operation at Overexpanded Conditions,” SPACE PROPULSION 2022, Estoril, Portugal, May 9-13, 2022.

[10] B. Monteiro, F. Jorge, J. Santos, P. Antunes, and A. Guerman, “A review of SmallSat constellations for IoT connectivity,” Proceedings of the 73rd International Astronautical Congress, IAC 2022, Paris, France, Paper IAC-22.B4.7.4.

[11] A. P. Silva, P. Santos, J. M. Parente, S. Valvez, and P. N. B. Reis, “Effect of different hostile solutions on mechanical properties of composite materials,” Procedia Structural Integrity, vol. 37, pp. 841-846, 2022.

[12] M. R. Pendar and J. C. Páscoa, “Electrostatic Painting Process: Impact of Using Connected High-Voltage Embodiments With Rotary Bell Atomizers on Droplets Transport and Deposition,” American Society of Mechanical Engineers, Fluids Engineering Division, vol. 2, 2022.

[13] M. R. Pendar, J. C. Páscoa, and R. Lima, “Numerical Investigation of Automotive Paint Oven for Improving the Thermal Efficiency,” American Society of Mechanical Engineers, Fluids Engineering Division, vol. 2, 2022.

[14] R. Domingues, F. Brójo, and P. Oliveira, “CFD Analysis of the Combustion of Hydrogen Fuel on a CFM56-3 Combustor,” Proceedings of the ASME 2022 International Mechanical Engineering Congress and Exposition, IMECE 2022, Columbus, Ohio, United States, October 30-November 3, 2022.

[15] S. Cândido and J. C. Páscoa, “Numerical analysis of interfacial electrohydrodynamic flow with modal decomposition,” ASME International Mechanical Engineering Congress and Exposition, Proceedings, vol. 8, 2022.

[16] R. Lopez, G. Gutierrez-Alcaraz, M. S. Javadi, G. J. Osorio, and J. P. S. Catalao, “Flexibility Participation by Prosumers in Active Distribution Network Operation,” 2022 IEEE International Conference on Environment and Electrical Engineering and 2022 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I&CPS Europe 2022, 2022.

[17] S. Valvez, A. P. Silva, P. N. B. Reis, and F. Berto, “Annealing effect on mechanical properties of 3D printed composites,” Procedia Structural Integrity, vol. 37, pp. 738-745, 2022.

[18] T. Morão and F. Brójo, “Numerical Modelling of the Performance of a Paraffin Hybrid Rocket Motor,” SPACE PROPULSION 2022, Estoril, Portugal, May 9-13, 2022.

[19] A. Nunes and F. Brójo, “Impact of the Rotor Material on the Performance of an Eddy Current Brake,” ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, Covilhã, Portugal, November 28-30, 2022.

[20] A. Duarte and F. Brójo, “Passive System for Combustion Optimization of Internal Combustion Engines,” ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, Covilhã, Portugal, November 28-30, 2022.

[21] D. Simão and F. Brójo, “Design and Optimization of a Bi-dimensional Admission for a Supersonic Aircraft,” ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, Covilhã, Portugal, November 28-30, 2022.

[22] I. Pereirinha and F. Brójo, “Simulation of the Performance of an Oblique Detonation Wave Engine,” ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, Covilhã, Portugal, November 28-30, 2022.

[23] P. Oliveira and F. Brójo, “Influence of Water Percentage on Performance and Emissions of a Diesel Engine Fuelled with Water-Emulsified Diesel,” ICEUBI 2022, International Congress on Engineering – Innovation and Sustainability Praxis, Covilhã, Portugal, November 28-30, 2022.

[1] A. Menezes, P. D. Gaspar, R. Mesquita, E. Assunção, and M. P. Simões, “GPS-based autonomous navigation system for multitask robotic rover for agricultural activities with augmented reality web application for supervision support on peach orchards,” Acta Horticulturae, vol. 1352, pp. 601-607, 2022.

[2] M. P. Simões, P. D. Gaspar, E. Assunção, R. Mesquita, and M. P. Simões, “Navigation system of autonomous multitask robotic rover for agricultural activities on peach orchards based on computer vision through tree trunk detection,” Acta Horticulturae, vol. 1352, pp. 593-599, 2022.

[3] A. Tavares, P. D. Gaspar, M. L. Aguiar, R. Mesquita, and M. P. Simões, “Robotic arm and gripper to pick fallen peaches in orchards,” Acta Horticulturae, vol. 1352, pp. 567-573, 2022.

[4] P. D. Gaspar, J. Alves, and T. M. Lima, “Towards the Application of a Simplified Approach for OSH Risk Assessment Through a User-Friendly and Expedite Computational Tool,” Studies in Systems, Decision and Control, vol. 406, pp. 41-51, 2022.

[5] R. Domingues and F. Brójo, “Conversion of Gas Turbine Combustors to Operate with a Hydrogen-Air Mixture: Modifications and Pollutant Emission Analysis,” in Hydrogen Energy – New Insights, IntechOpen, 2023.

[6] A. Veiros, R. Mesquita, P. D. Gaspar, and M. P. Simões, “Multitask robotic rover for agricultural activities (R2A2): a robotic platform for peach orchards,” Acta Horticulturae, vol. 1352, pp. 89-95, 2022.

[7] A. Veloso, N. Roque, A. Barateiro, C. Ramos, S. Lopes, P. Fragoso, P. Silvino, F. Vieira, M. C. Horta, P. D. Gaspar, C. Canavarro, and M. P. Simões, “Nutrient status and organic matter content of newly-established peach orchards in central Portugal,” Acta Horticulturae, vol. 1352, pp. 177-184, 2022.

[8] A. Veloso, P. D. Gaspar, L. P. Andrade, C. E. Santo, M. Resende, P. D. Silva, C. Canavarro, and M. P. Simões, “The effect of controlled atmosphere storage on fruit quality and postharvest performance of ‘Sweet Henry’ peach cultivar,” Acta Horticulturae, vol. 1352, pp. 635-642, 2022.

[9] R. Domingues and F. Brójo, “CFD Analysis of the Combustion of Hydrogen Fuel on a CFM56-3 Combustor,” in Hydrogen – New Insights, IntechOpen, 2022. https://doi.org/10.5772/intechopen.106224

No records listed.

[1] J. Alves and T. M. Lima, “Industry 4.0 and the sociodemographic challenge: Proposals for a human-centric approach,” 11th International Conference WorkingOnSafety, WOS 2022, Olhão, Portugal, September 25-28, 2022.

[2] L. P. Andrade, P. D. Gaspar, M. P. Simões, J. Nunes, and A. Veloso, “Conservação de cereja e pêssego em atmosferas controladas – Monitorização e mecanismos de controlo,” 9.º Congresso Luso-Moçambicano de Engenharia and VI Congresso de Engenharia de Moçambique, Maputo, Mozambique, August 28-September 1, 2022.

[3] J. Curto, P. D. Gaspar, P. D. Silva, A. Ilangovan, and N. Alves, “Transient 3D CFD modelling of the thermal performance of fruit packaging boxes with PCM alveoli,” 7th IIR International Conference on Sustainability and the Cold Chain, Newcastle, United Kingdom, April 11-13, 2022. https://doi.org/10.18462/iir.iccc2022.1128

[4] D. Fernandes, P. D. Silva, L. C. Pires, and P. D. Gaspar, “Adjusting the operating conditions of a refrigeration system in order to reduce the frost growth on heat exchange surfaces,” AIP Conference Proceedings, vol. 2425, Art. no. 420020, 2022. https://doi.org/10.1063/5.0082157

[5] B. Filipa, M. dos Santos, P. Garcez, D. T. Lima, and F. de Lima, “Responsabilidade Social no Setor da Indústria Mineira – A Perceção do Gestor Mineiro,” ENEGEP, 2022.

[6] P. D. Gaspar, E. Gonçalves, and L. P. Andrade, “Delay of fruits ripening by gases inhibition/activation – A review of techniques, methods, and devices,” IUFoST 2022 – 21st World Congress of Food Science & Technology, Singapore, October 31-November 3, 2022.

[7] A. Ilangovan, P. D. Gaspar, P. D. Silva, A. R. Gonçalves, A. M. Sampaio, A. J. Pontes, and N. Alves, “CFD parametric study of thermal performance of different fruit packaging box designs,” AIP Conference Proceedings, vol. 2425, Art. no. 420019, 2022. https://doi.org/10.1063/5.0081344

[8] A. Ilangovan, P. D. Silva, P. D. Gaspar, and D. Duarte, “Improving the thermal performance of fruit packaging boxes by using alveoli with phase change material,” 7th IIR International Conference on Sustainability and the Cold Chain, Newcastle, United Kingdom, April 11-13, 2022. https://doi.org/10.18462/iir.iccc2022.1135

[9] D. Marcos, M. Migués, H. Gomes, A. Garcez, and T. M. Lima, “Otimização do Planejamento da Produção,” ENEGEP, 2022.

[10] B. Moreira, P. D. Gaspar, and T. M. Lima, “Computational tool to support the sustainable selection of films and/or packaging for horticultural products,” IUFoST 2022 – 21st World Congress of Food Science & Technology, Singapore, October 31-November 3, 2022.

[11] H. R. D. Oliveira, A. P. B. Garcez, and T. M. Lima, “Proposta de Layout para Departamento de Maquinação CNC em Empresa Metalomecânica,” ENEGEP, October 10, 2022. https://doi.org/10.14488/ENEGEP2022_TN_ST_382_1889_45043

[12] E. M. V. Santos, C. M. M. Oliveira, J. F. Pereira, A. P. B. Garcez, and T. M. Lima, “Otimização de um Layout Recorrendo ao Diagrama de Spaghetti,” ENEGEP, October 10, 2022. https://doi.org/10.14488/ENEGEP2022_TN_ST_382_1889_45069

[13] K. F. Santos, A. Garcez, R. M. da Silva, and F. Charrua-Santos, “Digital transformation and lean thinking: perceived interconnections in the management of educational services at Campus III of the Federal University of Paraíba during and after the COVID-19 pandemic,” ICERI 2022 Proceedings, pp. 8144-8148, 2022.

[14] Abílio P. Silva, “Modelling of elastic modulus and thermal conductivity of ceramic composites using 3D volume elements,” Keynote Speaker, 8th International Conference on Innovative Research, 14th EUROINVENT, Palace of Culture, Iași, Romania, May 26-28, 2022.

[15] J. Silva, P. D. Gaspar, and A. Almeida, “Unmanned aerial vehicles application in agriculture: Possible solutions for the Portuguese territory,” International Congress on Engineering – Innovation and Sustainability Praxis, ICEUBI 2022, University of Beira Interior, Covilhã, Portugal, November 28-30, 2022.

[1] J. C. Vieira, A. C. Vieira, A. de O. Mendes, A. M. Carta, P. T. Fiadeiro, and A. P. Costa, “Mechanical Behavior of Toilet Paper Perforation,” BioResources, vol. 16, no. 3, pp. 4846-4861, 2021. https://doi.org/10.3390/polym14173448

[2] S. Valvez, P. N. B. Reis, L. Susmel, and F. Berto, “Fused filament fabrication-4D-printed shape memory polymers: A review,” Polymers, vol. 13, no. 5, pp. 1-25, 2021, Art. no. 701. https://doi.org/10.3390/polym13050701

[3] S. Valvez, A. Maceiras, P. Santos, and P. N. B. Reis, “Olive stones as filler for polymer-based composites: A review,” Materials, vol. 14, no. 4, pp. 1-32, 2021, Art. no. 845. https://doi.org/10.3390/ma14040845

[4] M. Trancossi, J. C. Pascoa, and S. Sharma, “A Critical Review on Heat and Mass Transfer Modelling of Viral Infection and Virion Evolution: The Case of SARS-CoV-2,” Thermal Science, vol. 25, no. 4, Part A, pp. 2831-2843, 2021. https://doi.org/10.2298/TSCI210614215T

[5] M. Trancossi, J. Pascoa, and S. Mazzacurati, “Sociotechnical design: A review and future interdisciplinary perspectives involving thermodynamics in today’s societal context,” International Communications in Heat and Mass Transfer, vol. 128, 2021, Art. no. 105622. https://doi.org/10.1016/j.icheatmasstransfer.2021.105622

[6] M. Trancossi, J. Pascoa, and G. Cannistraro, “Comments on ‘New insight into the definitions of the Bejan number’,” International Communications in Heat and Mass Transfer, vol. 120, 2021, Art. no. 104997. https://doi.org/10.1016/j.icheatmasstransfer.2020.104997

[7] M. Trancossi, C. Carli, G. Cannistraro, J. Pascoa, and S. Sharma, “Could thermodynamics and heat and mass transfer research produce a fundamental step advance toward a significant reduction of SARS-CoV-2 spread?,” International Journal of Heat and Mass Transfer, vol. 170, 2021, Art. no. 120983. https://doi.org/10.1016/j.ijheatmasstransfer.2021.120983

[8] D. Teixeira, V. F. Cardoso, G. Botelho, A. M. Morão, J. Nunes-Pereira, and S. Lanceros-Mendez, “Effect of polymer dissolution temperature and conditioning time on the morphological and physicochemical characteristics of poly(vinylidene fluoride) membranes prepared by non-solvent induced phase separation,” Polymers, vol. 13, no. 23, 2021, Art. no. 4062. https://doi.org/10.3390/polym13234062

[9] R. Silva, A. Garcez, M. Gomes, A. Morais, T. Lima, F. Santos, and M. Franco, “Active learning ‘factory of boxes’ in the teaching-learning processes in engineering and entrepreneurship,” Journal of Technical Education and Training, vol. 13, no. 3, pp. 1-14, 2021. https://publisher.uthm.edu.my/ojs/index.php/JTET/article/view/8488/4439

[10] A. P. Silva, P. Santos, J. Parente, S. Valvez, and P. N. B. Reis, “Effect of harsh environmental conditions on the impact response of carbon composites with filled matrix by cork powder,” Applied Sciences, vol. 11, no. 16, 2021, Art. no. 7436. https://doi.org/10.3390/app11167436

[11] P. Santos, A. Maceiras, S. Valvez, and P. N. B. Reis, “Mechanical characterization of different epoxy resins enhanced with carbon nanofibers,” Frattura ed Integrità Strutturale, vol. 15, no. 55, pp. 198-212, 2021. https://www.fracturae.com/index.php/fis/article/view/2943

[12] P. Santos, D. V. Enrique, V. B. P. Maciel, T. M. Lima, F. Charrua-Santos, and R. Walczak, “The synergic relationship between Industry 4.0 and lean management: Best practices from the literature,” Management and Production Engineering Review, vol. 12, no. 1, pp. 94-107, 2021. https://dx.doi.org/10.24425/mper.2021.136875

[13] A. F. Santos, P. D. Gaspar, and H. J. L. Souza, “Measuring the energy efficiency of evaporative systems through a new index—EVACOP,” Energies, vol. 14, no. 9, 2021, Art. no. 2689. https://doi.org/10.3390/en14092689

[14] A. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Ecoenergetic comparison of HVAC systems in data centers,” Climate, vol. 9, no. 3, pp. 1-14, 2021, Art. no. 42. https://doi.org/10.3390/cli9030042

[15] A. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Refrigeration of COVID-19 vaccines: Ideal storage characteristics, energy efficiency and environmental impacts of various vaccine options,” Energies, vol. 14, no. 7, 2021, Art. no. 1849. https://doi.org/10.3390/en14071849

[16] A. F. Santos, P. D. Gaspar, and H. J. L. de Souza, “Evaluation of the thermal performance and energy efficiency of CRAC equipment through mathematical modeling using a new index COP WEUED,” Applied Sciences, vol. 11, no. 13, 2021, Art. no. 5950. https://doi.org/10.3390/app11135950

[17] F. Rodrigues, M. Abdollahzadeh, J. C. Pascoa, and P. J. Oliveira, “An experimental study on segmented-encapsulated electrode dielectric-barrier-discharge plasma actuator for mapping ice formation on a surface: A conceptual analysis,” Journal of Heat Transfer, vol. 143, no. 1, 2021, Art. no. 011701. https://doi.org/10.1115/1.4048252

[18] P. N. B. Reis, A. P. Silva, P. Santos, J. Parente, and S. Valvez, “Effect of hostile solutions on the residual fatigue life of Kevlar/epoxy composites after impact loading,” Molecules, vol. 26, no. 18, 2021, Art. no. 5520. https://doi.org/10.3390/molecules26185520

[19] P. Pina, P. D. Gaspar, and T. M. Lima, “Decision support system in dynamic pricing of horticultural products based on the quality decline due to bacterial growth,” Applied System Innovation, vol. 4, no. 4, 2021, Art. no. 80. https://doi.org/10.3390/asi4040080

[20] M. R. Pendar and J. C. Páscoa, “Numerical analysis of charged droplets size distribution in the electrostatic coating process: Effect of different operational conditions,” Physics of Fluids, vol. 33, no. 3, 2021, Art. no. 033317. https://doi.org/10.1115/FEDSM2022-88033

[21] K. Padhi and F. Charrua-Santos, “6G enabled industrial internet of everything: Towards a theoretical framework,” Applied System Innovation, vol. 4, no. 1, pp. 1-30, 2021, Art. no. 11. https://doi.org/10.3390/asi4010011

[22] G. J. Osório, M. Lotfi, M. Gough, M. Javadi, H. M. D. Espassandim, M. Shafie-khah, and J. P. S. Catalão, “Modeling an electric vehicle parking lot with solar rooftop participating in the reserve market and in ancillary services provision,” Journal of Cleaner Production, vol. 318, 2021, Art. no. 128503. https://doi.org/10.1016/j.jclepro.2021.128503

[23] G. J. Osório, M. Gough, M. Lotfi, S. F. Santos, H. M. D. Espassandim, M. Shafie-khah, and J. P. S. Catalão, “Rooftop photovoltaic parking lots to support electric vehicles charging: A comprehensive survey,” International Journal of Electrical Power and Energy Systems, vol. 133, 2021, Art. no. 107274. https://doi.org/10.1016/j.ijepes.2021.107274

[24] M. L. Lourenço, F. Lanhoso, and D. A. Coelho, “Usability evaluation of slanted computer mice,” International Journal of Environmental Research and Public Health, vol. 18, no. 8, 2021, Art. no. 3854. https://doi.org/10.3390/ijerph18083854

[25] M. Lotfi, G. Osório, M. Javadi, A. Ashraf, M. Zahran, G. Samih, and J. P. S. Catalao, “A Dijkstra-Inspired Graph Algorithm for Fully Autonomous Tasking in Industrial Applications,” IEEE Transactions on Industry Applications, vol. 57, no. 5, pp. 5448-5460, 2021, Art. no. 9462369. https://doi.org/10.1109/EEEIC/ICPSEurope49358.2020.9160688

[26] J. M. Lopes, R. Laurett, H. Antunes, and J. Oliveira, “Entrepreneurial marketing: A bibliometric analysis of the second decade of the 21st century and future agenda,” Journal of Research in Marketing and Entrepreneurship, vol. 23, no. 2, pp. 295-317, 2021. https://doi.org/10.1108/JRME-02-2019-0019

[27] T. M. Lima and D. A. Coelho, “Gender differences in associating musculoskeletal complaints, housework, electronic device usage and physical exercise for administrative workers,” International Journal of Occupational Safety and Ergonomics, 2021. https://doi.org/10.1080/10803548.2021.1878695

[28] M. Lebre, P. D. Silva, L. C. Pires, and P. D. Gaspar, “Computational modeling of the thermal behavior of a greenhouse,” Applied Sciences, vol. 11, no. 24, 2021, Art. no. 11816. https://doi.org/10.3390/app112411816

[29] S. Kumar, F. Leitão, P. D. Gaspar, and P. D. Silva, “Experimental Tests of the Thermal Behaviour of New Sustainable Bio-Packaging Food Boxes,” Procedia Environmental Science, Engineering and Management, vol. 8, no. 1, pp. 215-223, 2021. http://procedia-esem.eu/pdf/issues/2021/no1/24_02.24.daSilva_21.pdf

[30] D. Ivanov, U. Monakhova, A. Guerman, M. Ovchinnikov, and D. Roldugin, “Decentralized differential drag based control of nanosatellites swarm spatial distribution using magnetorquers,” Advances in Space Research, vol. 67, no. 11, pp. 3489-3503, 2021. https://doi.org/10.1016/j.asr.2020.05.024

[31] D. Ivanov, U. Monakhova, A. Guerman, and M. Ovchinnikov, “Decentralized control of nanosatellite tetrahedral formation flying using aerodynamic forces,” Aerospace, vol. 8, no. 8, 2021, Art. no. 199. https://doi.org/10.3390/aerospace8080199

[32] A. Ilangovan, J. Curto, P. D. Gaspar, P. D. Silva, and N. Alves, “CFD modelling of the thermal performance of fruit packaging boxes—influence of vent-holes design,” Energies, vol. 14, no. 23, 2021, Art. no. 7990. https://doi.org/10.3390/en14237990

[33] A. Habibnia Rami and J. C. Pascoa, “Performance Optimization of Forward-Flight and Lift-Up Phases in a Cycloidal Rotor Using an Active Control Mechanism,” Journal of Aerospace Engineering, vol. 34, no. 4, 2021, Art. no. 1275. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001275

[34] A. Habibnia Rami and J. Carlos Pascoa, “Coupled Active Control Technique for Oscillating Blades in a Cycloidal Rotor Using CFD and ANN Analysis by Including 3D End Wall Effects,” Journal of Aerospace Engineering, vol. 34, no. 6, 2021, Art. no. 04021089. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001332

[35] A. Habibnia and J. Pascoa, “Active control assessments towards optimizing the performance of a cycloidal rotor at hover,” Aerospace Science and Technology, vol. 119, 2021, Art. no. 107141. https://doi.org/10.1016/j.ast.2021.107141

[36] E. Gomes, M. I. D. Iglésias, A. P. Proença, T. M. Lima, and P. D. Gaspar, “Applying a genetic algorithm to a m-TSP: Case study of a decision support system for optimizing a beverage logistics vehicles routing problem,” Electronics, vol. 10, no. 18, 2021, Art. no. 2298. https://doi.org/10.3390/electronics10182298

[37] P. D. Gaspar, R. Godina, and R. Barrau, “Influence of orchard cultural practices during the productive process of cherries through life cycle assessment,” Processes, vol. 9, no. 6, 2021, Art. no. 1065. https://doi.org/10.3390/pr9061065

[38] P. D. Gaspar, C. M. Fernandez, V. N. G. J. Soares, J. M. L. P. Caldeira, and H. Silva, “Development of technological capabilities through the Internet of Things: Survey of opportunities and barriers for IoT implementation in Portugal’s agro-industry,” Applied Sciences, vol. 11, no. 8, 2021, Art. no. 3454. https://doi.org/10.3390/app11083454

[39] P. D. Gaspar, J. Alves, and P. Pinto, “Simplified approach to predict food safety through the maximum specific bacterial growth rate as function of extrinsic and intrinsic parameters,” ChemEngineering, vol. 5, no. 2, 2021, Art. no. 22. https://doi.org/10.3390/chemengineering5020022

[40] C. M. Fernandez, J. Alves, P. D. Gaspar, and T. M. Lima, “Fostering awareness on environmentally sustainable technological solutions for the post-harvest food supply chain,” Processes, vol. 9, no. 9, 2021, Art. no. 1611. https://doi.org/10.3390/pr9091611

[41] J. P. Curto and P. D. Gaspar, “Traceability in food supply chains: Review and SME focused analysis—Part 1,” AIMS Agriculture and Food, vol. 6, no. 2, pp. 679-707, 2021. https://doi.org/10.3934/agrfood.2021041

[42] J. P. Curto and P. D. Gaspar, “Traceability in food supply chains: SME focused traceability framework for chain-wide quality and safety—Part 2,” AIMS Agriculture and Food, vol. 6, no. 2, pp. 708-736, 2021. https://doi.org/10.3934/agrfood.2021042

[43] D. A. Coelho and M. L. Lourenço, “Dynamics of forearm muscle activity in slanted computer mice use,” Work, vol. 68, no. 1, pp. 123-135, 2021. https://content.iospress.com/articles/work/wor203242

[44] M. C. Carneiro, A. Maceiras, J. Nunes-Pereira, P. D. Silva, A. P. Silva, and C. Baudín, “Property characterization and numerical modelling of the thermal conductivity of CaZrO3-MgO ceramic composites,” Journal of the European Ceramic Society, vol. 41, no. 14, pp. 7241-7252, 2021. https://doi.org/10.1016/j.jeurceramsoc.2021.06.044

[45] A. Benmoussa and J. C. Páscoa, “Cycloidal rotor coupled with DBD plasma actuators for performance improvement,” Aerospace Science and Technology, vol. 110, 2021, Art. no. 106468. https://doi.org/10.1016/j.ast.2020.106468

[46] A. Benmoussa and J. C. Páscoa, “Performance improvement and start-up characteristics of a cyclorotor using multiple plasma actuators,” Meccanica, vol. 56, no. 11, pp. 2707-2730, 2021. https://doi.org/10.1007/s11012-021-01413-4

[47] J. Ananias, P. D. Gaspar, V. N. G. J. Soares, and J. M. L. P. Caldeira, “Artificial intelligence decision support system based on artificial neural networks to predict the commercialization time by the evolution of peach quality,” Electronics, vol. 10, no. 19, 2021, Art. no. 2394. https://doi.org/10.3390/electronics10192394

[48] K. Alibabaei, P. D. Gaspar, and T. M. Lima, “Crop yield estimation using deep learning based on climate big data and irrigation scheduling,” Energies, vol. 14, no. 11, 2021, Art. no. 3004. https://doi.org/10.3390/rs14030638

[49] K. Alibabaei, P. D. Gaspar, and T. M. Lima, “Modeling soil water content and reference evapotranspiration from climate data using deep learning method,” Applied Sciences, vol. 11, no. 11, 2021, Art. no. 5029. https://doi.org/10.3390/app11115029

[50] A. Akaev, T. Devezas, Y. Ichkitidze, and A. Sarygulov, “Forecasting the labor intensity and labor income share for G7 countries in the digital age,” Technological Forecasting and Social Change, vol. 167, 2021, Art. no. 120675. https://doi.org/10.1016/j.techfore.2021.120675

[51] M. L. Aguiar, P. D. Gaspar, and P. D. Silva, “Testing of a Resistive Sensor with Fabric Medium for Monitoring Frost Formation in Refrigeration Systems,” Procedia Environmental Science, Engineering and Management, vol. 8, no. 1, pp. 205-214, 2021. https://www.procedia-esem.eu/pdf/issues/2021/no1/23_02.23.Gaspar.02_21.pdf

[1] M. Trancossi and J. Pascoa, “Irreversibility Analysis, Design, and Optimization of a Combined Hybrid Hot Air and Buoyant Gas Balloon for Stratospheric Persistence,” ASME International Mechanical Engineering Congress and Exposition, Proceedings, vol. 11, 2021.

[2] M. Tabatabaei, M. S. Nazar, M. Shafie-Khah, G. J. Osorio, and J. P. S. Catalao, “Optimal Scheduling of Microgrid-Based Virtual Power Plants Considering Demand Response and Capacity Withholding Opportunities,” 2021 IEEE Madrid PowerTech, 2021.

[3] F. Rodrigues, J. Nunes-Pereira, M. Abdollahzadeh, J. Pascoa, and S. Lanceros-Mendez, “Comparative evaluation of dielectric materials for plasma actuators active flow control and heat transfer applications,” American Society of Mechanical Engineers, Fluids Engineering Division, vol. 3, 2021.

[4] F. Rodrigues, M. Moreira, and J. Pascoa, “Analysis and implementation of dielectric barrier discharge plasma actuators for ground vehicles wake reduction,” American Society of Mechanical Engineers, Fluids Engineering Division, vol. 3, 2021.

[5] F. Rodrigues, M. Abdollahzadeh, J. Pascoa, and L. Pires, “Influence of exposed electrode thickness on plasma actuators performance for coupled deicing and flow control applications,” American Society of Mechanical Engineers, Fluids Engineering Division, vol. 3, 2021.

[6] C. G. Reina, S. F. Santos, G. J. Osorio, O. Erdinc, and J. P. S. Catalao, “Assessing the Impact of Peer-to-Peer Markets on Distribution Grid Operation,” 10th International Conference on Power Science and Engineering, ICPSE 2021, pp. 50-55, 2021.

[7] R. Reigones and P. D. Gaspar, “Real-Time Vital Signs Monitoring System towards Livestock Health Furtherance,” Proceedings of the 6th International Conference on Inventive Computation Technologies, ICICT 2021, pp. 753-758, 2021.

[8] I. G. Raposo, L. C. C. Pires, J. A. F. Moutinho, P. D. Silva, and A. R. Gouveia, “Development of a Thermographic Database with Images of the Vulva,” ACM International Conference Proceeding Series, pp. 32-36, 2021.

[9] P. Ramos, M. Vahid-Ghavidel, G. J. Osorio, M. Shafie-Khah, O. Erdinc, and J. P. S. Catalao, “Influence of Demand Response Programs in Microgrids Facing Photovoltaic and Battery Integration,” 10th International Conference on Power Science and Engineering, ICPSE 2021, pp. 34-40, 2021.

[10] M. R. Pendar and J. Pascoa, “Numerical Simulation of the Electrostatic Coating Process: The Effect of Applied Voltage, Droplet Charge and Size on the Coating Efficiency,” SAE Technical Papers, 2021.

[11] M. R. Pendar and J. Pascoa, “Study of the Plasma Actuator Effect on the Flow Characteristics of an Airfoil: An LES Investigation,” SAE Technical Papers, 2021.

[12] A. Nunes and F. Brójo, “Development of a Novel 4-Stroke Spark Ignition Opposed Piston Engine,” ASME International Mechanical Engineering Congress and Exposition, Proceedings, vol. 4, 2021.

[13] M. Michele and J. Pascoa, “Fluence as an Instrument towards a Unified Representation of Fluid-Dynamic Related Phenomena,” ASME International Mechanical Engineering Congress and Exposition, Proceedings, vol. 4, 2021.

[14] S. Mendes, T. M. Lima, and P. D. Gaspar, “Lean Tools Selector – A Decision Support System,” International Conference on Decision Aid Sciences and Application, DASA 2021, pp. 45-50, 2021.

[15] D. F. Macedo and A. P. Silva, “Analysis of the effect of doped metal ions in the tricalcium phosphate bioceramic,” Journal of Physics: Conference Series, vol. 1960, 2021. https://doi.org/10.1088/1742-6596/1960/1/012014

[16] J. Lopes, T. Canhão, M. Antunes, T. M. Lima, and P. D. Gaspar, “Computational decision-making support tool for the optimized application of phytopharmaceuticals,” International Conference on Decision Aid Sciences and Application, DASA 2021, pp. 17-21, 2021.

[17] F. Leitão, S. K. Madhan, P. D. Silva, and P. D. Gaspar, “Experimental Testing of the Thermal Response of Different Food Alveoli Solutions for Packaging Boxes,” Lecture Notes in Engineering and Computer Science, vol. 2242, pp. 268-272, 2021.

[18] M. Hasankhani, S. M. Hakimi, M. Bodaghi, M. Shafie-Khah, G. J. Osorio, and J. P. S. Catalao, “Day-Ahead Optimal Management of Plug-in Hybrid Electric Vehicles in Smart Homes Considering Uncertainties,” 2021 IEEE Madrid PowerTech, 2021.

[19] S. Hamdane, P. D. Silva, L. C. C. Pires, and A. Moummi, “Comparison study between using air data and soil data in predicting soil temperature,” World Congress in Computational Mechanics and ECCOMAS Congress, vol. 1200, 2021.

[20] M. G. Rebelo, R. E. A. de Sousa, and M. A. Rodrigues Silvestre, “Numerical modeling and experimental validation of a coreless permanent magnet synchronous motor,” 12th International Conference on Mechanical and Aerospace Engineering, ICMAE 2021, pp. 298-303, 2021.

[21] D. V. Enrique, J. C. M. Druczkoski, T. M. Lima, and F. Charrua-Santos, “Advantages and difficulties of implementing Industry 4.0 technologies for labor flexibility,” Procedia Computer Science, vol. 181, pp. 347-352, 2021.

[22] J. Curto, A. Ilangovan, P. D. Gaspar, P. D. Silva, and N. Alves, “Numerical study of the impact on cooling behaviour of vent-holes design of fruit packaging boxes,” World Congress in Computational Mechanics and ECCOMAS Congress, vol. 600, pp. 1-14, 2021.

[23] S. Cândido and J. C. Pascoa, “Numerical Simulation of Electrified Liquid Jets Using a Geometrical VOF Method,” ASME International Mechanical Engineering Congress and Exposition, Proceedings, vol. 10, 2021.

[24] H. Agostinho, G. Guilherme, S. Marcelino, T. M. Lima, and P. D. Gaspar, “Decision Support System for the Application of Lean Healthcare in Stock Management in Health Facilities,” International Conference on Decision Aid Sciences and Application, DASA 2021, pp. 886-891, 2021.

[25] Leonardo Marchiori, André Studart, António Albuquerque, Victor Cavaleiro, and Abílio Silva, “Geotechnical Characterization of Water Treatment Sludge for Liner Material Production and Soft Soil Reinforcement,” Materials Science Forum, vol. 1046, pp. 83-88, 2021. https://doi.org/10.4028/www.scientific.net/MSF.1046.83

[26] Massochy Ventura, Abílio Silva, Pedro Rosa, Jaime Vilinga, and Herminio Faias, “Escudos cerâmicos em sistemas de dupla camada,” 3.º Encontro de ID&I em Ciências Militares, Academia Militar, Lisboa, November 22, 2021.

[27] V. Razoumny, F. Graziani, A. D. Guerman, and J. M. Contant, “Foreword,” Advances in the Astronautical Sciences, vol. 174, pp. 14-24, 2021.

[28] A. Morais, M. L. Aguiar, P. D. Gaspar, and P. D. Silva, “Development of a Monitoring Device for Fruit Products Transportation in the Cold Chain,” Procedia Environmental Science, Engineering and Management, vol. 8, no. 1, pp. 195-204, 2021.

[1] D. Matos, V. Maciel, C. M. Fernandez, T. M. Lima, and P. D. Gaspar, “Decision Support System to Assign Price Rebates of Fresh Horticultural Products Based on Quality Decay,” in Modeling and Optimization in Science and Technologies, vol. 18, pp. 487-497, 2021.

[2] L. Marchiori, A. Studart, A. Albuquerque, V. Cavaleiro, and A. Silva, “Geotechnical characterization of water treatment sludge for liner material production and soft soil reinforcement,” in Materials Science Forum, vol. 1046, pp. 83-88, 2021.

[3] T. Devezas and H. Ruão, “Aluminum Production and Aviation: An Interesting Case of an Interwoven Rebound Effect in a Digital Transforming World,” in Studies on Entrepreneurship, Structural Change and Industrial Dynamics, pp. 251-281, 2021.

[4] T. Devezas, J. Leitão, and A. Sarygulov, “The Economics of Digital Transformation: Approaching Non-stable and Uncertain Digitalized Production Systems,” in Studies on Entrepreneurship, Structural Change and Industrial Dynamics, pp. 1-4, 2021.

[5] J. Cunha, P. D. Gaspar, E. Assunção, and R. Mesquita, “Prediction of the Vigor and Health of Peach Tree Orchard,” in Lecture Notes in Computer Science, vol. 12951, pp. 541-551, 2021.

[6] M. A. Alves, P. J. Oliveira, and F. T. Pinho, “Numerical Methods for Viscoelastic Fluid Flows,” in Annual Review of Fluid Mechanics, vol. 53, pp. 509-541, 2021.

[7] A. A. Akaev, A. I. Rudskoy, and T. Devezas, “Technological Substitution of Jobs in the Digital Economy and Shift in Labor Demand Towards Advanced Qualifications,” in Studies on Entrepreneurship, Structural Change and Industrial Dynamics, pp. 85-103, 2021.

[8] A. Akaev, A. Rudskoy, and T. Devezas, “Social and Economic Consequences of Large-scale Digitization and Robotization of the Modern Economy,” in Studies on Entrepreneurship, Structural Change and Industrial Dynamics, pp. 5-23, 2021.

[9] A. Akaev, T. Devezas, L. Ungvari, and A. Petryakov, “Evaluation algorithm of probabilistic transformation of a random variable,” in Lecture Notes in Networks and Systems, vol. 157, pp. 77-88, 2021.